Raimann KM310 Rip Saw Per seller: The saw runs material. The variable infeed is stuck on one speed.

Raimann KM310M Rip Saw ValuRip Infeed System One moving Blade

Reckmann Moulder/Sander ready to be loaded!

Rees 10 HP Dust Collection System

Excellent condition Less than 6 hrs on machine

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

Accu-Systems MMTJ Door Machine

75 KVA 480 volt to 240 volt

AEM 36" Sander

AER 5,000 CFM Dust System

There are two drums and burners that will be sold as one package. They are ready for immediate removal: - 13x60 Stainless Steel Drum - Dual 70 million btu natural gas burners, max thermal output of 42.200.000 kj/h, discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. - These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubicmeter/second. Equipment plant drawing, manuals and blueprints available when system is purchased.

Alpha Brush KS-LS Sander

Altendorf F45 Elmo Sliding Table Saw

Altendorf Sliding Table Saw

Stage #1 48” width 2 lights Stage #2 40” width 3 lights 220 volt singular phase

The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise direction - Compares to the Marunaka SL-250 - 9-7/8" (250mm) Max lumber slicing width: With up to 9-7/8" high cant, veneer thickness 1/25" to 3/8". 75° knife angle with 18 ° knife bevel - Knife length: 46-1/2" (1,180mm) - Motorized upper feed beam with Continuous belt feed - Variable speed: 120-180FPM (40-60 m/min) - 30HP feed motor - Head elevator: 1HP - Approximate weight: 16,000 lbs - 327"L x 62"W x 75"H

Atlantic Dust Collection 10 HP Dust Collector

Altas Model GX11FF 15 HP Compressor 3,580 Hours