PalletPal Spring Lift Table Specifications Load capacity 400 to 4500 lbs., depending on springs Load size .......50" wide x 50" long x 72" high (max.) Length 45 1/4 inches Width (base frame) 36 3/4 inches Compressed height 9 1/2 inches Extended height 27 3/4 inches Rotating ring, outside diameter 43 5/8 inches Rotating ring, inside diameter 40 5/8 inches Adjustment for sloping floors Can adjust for floor slope up to 1:25 using optional adjustable feet 4 Available

4000# capacity 96” x 64” table size raised height 38-1/2" Lowered height 14-1/2" pneunatic operation Rotatable table 360 degrees safety skirts

Qty 4 Thermostats attached to 2 heaters

The seller has confirmed that this is in fair working/running condition and it is ready to load! - Cross cut panel saw

20’ speed cut system. Was pulled out of production September 26th.

PELLET COMPANY EQUIPMENT - Everything has already been dismantled and loaded into trailers. They are ready to ship! Selling as one lot. Owner will not separate. Pellet Company & Equipment - (2) Bagging line – CableVey system for dust free environment - Auto Sealer for bagging - Bagging System with complete with all conveyors - Mixer to custom blend pellets - 150 HP Sprout, with conditioner - Bench Industries grain cleaner - $20k bag inventory – form fill ready - Shrink Wrap machine for pallets - 5 Ton scale for pallets - Bulk Totes filling lane - Indoor Pellet tank storage for bagging - 50 tons on floor in bags & totes Trailers & Semis - 1985 Kenworth Semi with wet kit - 53’ Walking floor with auto tarp from Prairie Trailer 2022 - 53’ Open Tarp Trailer - 48’ 3 box trailers

(2) Sprout Waldron Pellet Mills 125 HP Motors Systems were tested - then painted and never put into production. Seller ran wood pellets and pine

Sprout- Waldron shaker screener, was running when pulled out of production.

Sprout 501H Pellet Miill New 100 HP Motor New: SS Door, Shroud, Main Shaft/Die Housing, 14-Vbelts

Sta dard Tools & Equipment Paint Booth

Stanza STS300-6 Linear Spraying Line Includes pumps and guns. ( See photos description ) Stanza stain wiping machine

Stephanie Edgebander with Doucet Return Conveyor Air Fusion Hot Air Anti-Adhesive Pre-Mill Edgebander Corner Rounding End Trim Top & Bottom Trim Profile/Glue Scrape & Buff

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 12mm. Machine Base The machine base is a rigid, ribbed steel structure and is designed to provide maximum support for the working units. The ribs provide stability and, at the same time, provide openings in the base to facilitate removal of the chips/dust. Capacities And Speed Edgebanding thickness: .4mm - 12mm (.016-1/2”) Guillotine capacity: 3mm Feed speed: 33-66 ft/min. Panel height: 3/8” min – 2 3/8” max Minimum panel length: 5 1/2” Minimum panel width: 2” Minimum distance between panels: 24” Startouch Controller The Stefani KD comes equipped with the new "Startouch" controller. This controller features a 12" touch screen display. Capable of storing 100 programs, 6 at the touch of a single key. Color graphic display of all the working units.

STEFANI SOLUTION 8600 CNC EDGEBANDER CNC HORIZONTAL & VERTICAL POSITIONING, STANDARD STATIONS, PRE-MILL, ROUGH & FINE TRIM STATIONS, CORNER ROUNDING, MX80 HSK MILLING UNIT, RAS/S & RCA/2C SCRAPING UNIT, SP/F TOP & BOTTOM BUFFING EDGEBANDING THICKNESS: 0.4MM – 22MM PVC & ABS IN COIL OR STRIPS HPL STRIPS SOLID WOOD UP TO 22MM PANEL HEIGHT: 10 - 60MM (3/8” MIN – 2 3/8” MAX) MINIMUM PANEL LENGTH: 140MM (5 1/2”) MINIMUM PANEL DIMENSIONS: WITH MANUAL IN-FEED LENGTH WISE : WIDTH X LENGTH90 X 220 MM (3 1/2" X 8 3/4") CROSS WISE : WIDTH X LENGTH 220 X 135 MM (8 34" X 5 3/8") FEED SPEED: 12 - 25 M/MIN (40 - 82 FT/MIN) MINIMUM DISTANCE BETWEEN PANELS: 650MM (25 1/2”) (32” WITH CORNER ROUNDING) MACHINE WORKING HEIGHT: 950MM – 970MM (37.4” – 38.2”)

Stenner 36" Bandsaw, older unit but was running when pulled out of production.

15 HP Dust System

4300mm x 1920mm x 80mm work area 4.4 KW 3450 RPM motor 300mm blade with 30mm arbor 14'1" rip cut 6'3"cross cut 220/440 volt 3 phase

Stromab TR450 Upcut Saw Demo unit - very low usage!

Stromab WS1 Cutoff Saw Thru feed system with defecting o cutting preset sizes - NO optimizing! Operator can mark the board with crayon. Demo unit with low hours!

Stromab Stromab TR350 Up Cut Saw 4 HP Motor (230v/3ph) Variable Feed Speed This was a demo machine. Ready to ship!