PELLET.TOWER Pellet Manufacturing System. -- Complete modular, vertically designed Pellet Manufacturing System within a 65' tall free-standing tower containing all the Pellet Manufacturing equipment necessary on a 17' x 20' concrete pad including all pellet producing material handling & conveyor systems. -- 25,000 - 30,000 Tons annual pellet capacity from wood or agricultural waste streams. -- Tower includes: (6) Levels, vertically integrated on top of each other; an operator monitoring station is located at the ground level, processing equipment is in the top (5) levels. -- Each level has direct "walk-up" service and maintenance access without personal lifts, ladders, or other access devices. -- Complete integration of electric power supply & panels, Compressed Air, Air Filters, and Dust Collection, with safety controls linked throughout the automated system. -- System designed to run and be maintained by (1) on-site operator or off-site with remote PC monitoring of the entire process. -- Each level includes high quality brand name equipment: Hammer Mill at the beginning of the process, Material Holding & Dosing Bin, as well as the Dust Collection & Air Handling system at the very top of the Tower. -- Binding Agent System, multiple Foreign Material Separators, Water Dosing with moisture control; Ripening Silo; high production Pellet Mill, Pellet Cooler, final Screening Station on levels below. -- Includes following auxiliary equipment: Process Control with full Visualization (on Monitors), Fire Protection, Explosion Prevention, Dust Collection, Spark Detection, Water Distribution, Compressed Air, and a Central Vacuum Cleaning System that makes all a clean enclosed work environment. -- The 6-levels are in a completely self-contained steel structure, enclosed with insulated sandwich panels and weatherproof cladding. -- Post-installation, in case of relocation, the Tower can be divided into (4) units for transportation on flatbed trailers; dismantling & reconstruction requires approx.(6) weeks. Pricing includes "delivery to site, installation & training". Please ask for full quote with all specifics - and geared toward your location, material, and application!

The PELLET.TOWER is a modular, vertically designed Pellet Manufacturing System providing an innovative, but proven solution to biomass pellet fuel production."Single Tower Series": -- Capacity: 2.8 - 6.6 tons/Hr (2.5 - 6.0 metric tons/Hr); -- Installed power: 415 - 750 HP (310 - 560 kW); -- Dimensioins: 17' x 20' x 69' (5 x 6 x 21 m); -- Weight: 79 - 90 tons (72 - 82 metric tons)."Dual Tower Series": -- Capacity: 6.6 - 11.0 tons/Hr (6.0 - 10.0 metric tons/Hr); -- Installed power: 945 - 1,275 HP (705 - 950 kW); -- Dimensions: 32' x 18' x 75' (10 x 5.5 x 23 m); -- Weight: 157 - 165 tons (142 - 150 metric tons)."Triple Tower Series": -- Capacity: 10 - 15 Tons/Hr. (9.0 - 13.6 metric tons/Hr); -- Installed power: 1,542 – 1,823 HP (1,150 – 1,360 kW); -- Dimensions: 67.25' x 26.9' x 75.13' (20.5 x8.2 x 22.9 m); -- Weight: 232 - 243 tons (210 -220 metric tons).System Highlights: -- Over 100.000 Hrs operating experience. -- Modular system to produce high quality pellets; -- Standardizes components; -- Compact design (small footprint); -- No building required ("single machine"); -- Semi-mobile system (relocation possible).Main Components: -- Feeding bin; -- Binding agend adding; -- Foreign material separator; -- Hammermill; -- Air/material separator; -- Conditioning bin(s); -- Pellet mill(s); -- Central lubricator; -- Pellet cooler(s); -- Pellet screen(s); -- Exhaust air filter; -- Compressed air; -- Fire/spark detection & extinguishing; -- Central vacuum cleaning system; -- PLC control & visualization.

PERDURE model P006 Wood Torrefaction Line with Propane Heating;Oven roasting type complete with the following components and features: -- (6) Meter-long treatment Chamber. -- 1.2 Million BTU propane Heater (or convert to natural gas). -- Afterburner. -- Entrance and exit Conveyor with motorized Trolleys. -- (2) Sliding Doors closed with electric Jacks, -- (2) Stirrers, -- (2) Burners, -- (1) Main Fan -- Water Circuit. -- PCI INDUSTRIES Multi-zone Climate Control System based on thermocouple temperature measurements. -- The setup is equipped with a system for heat recovery and combustion (afterburner) of volatile organic compounds (VOCs) emitted by the wood, which results in reduced energy consumption. -- Final treatment of the product load is cooling by water injection.NOTES: &#9679 The PERDURE process is distinguished by relatively short processing times (7 to 16 hours depending on the species and the thickness of the parts processed) and the low loading capacity of the ovens (approximately 3 to 8 Mbmp). &#9679 The original 2006 purchase was $ 991,000.00 in Canadian funds.

PETERSON PACIFIC 5000G WOOD CHIPPER (DIESEL) --Specifications: CAT 3412E 1000 HP Diesel Engine; 3-Flail, Key Knife system currently set for 5/8 chip size. --Recent Machine Overhauls (per Seller): Overhung load adapters both replaced within 1000 hrs Fan pump replaced within 1500 hrs Swing/ boom pump replaced within 750 hrs Stick boom pump replaced within 100 hrs Engine computer less than 750 hours High pressure fuel pump less than 750 hours New radiator last summer Update main boom pump & flow divider last fall Installed a new seat 2 years ago New muffler New auxiliary bark pusher pump --Includes: Spare flail pump, Spare flail motor, New feed roll teeth, Spare belts, Spare pins, Seal kits, Spare clutch, Various other Spare parts --Hours: To be advised. --Contact Us for Competitive Leasing Options! --All equipment is advertised to the best of our knowledge and everything is sold “AS IS"; with no guarantees.

POWERSCREEN TRAKPACTOR 500 TRACKED IMPACT CRUSHER (DIESEL) --Features: 500 HP Scania DC13 385A Engine; Umbilical and Wireless Controls; 500 Tons/Hr. Output Potential (depends on size/type); --Specifications: 16' x 5' Post-Screens and Fines Conveyor with 12'7" Discharge Height; 16'3" x 8'7" Hopper; Working Dimensions: 56' x 9'10" x 13'6"; Transport Dimensions: 56’8";x 9’10";x 12’6";; Weight: 115,919 Lbs. --Hours: Approx. 9,600 --Seller States: Starts, runs, and operates like it should; Recently serviced on 9/17/24 at 9,579 hours; Belts and rollers in good condition. --Contact Us for Competitive Leasing Options. --All equipment is advertised to the best of our knowledge and everything is sold “AS IS"; with no guarantees.#Powerscreen #ConstructionEquipment #ImpactCrusher

PREMIER TECH VP-415 High-Speed Four-Station Compression BaggerFinished Bag Dimensions 16" wide x 9" deep x adjustable lengthSpecifications: -- Speed: up to 6.5 bales per minute -- Bulk materials: fibrous, flake -- Bag types: gusseted flat bottom bale, tubular film ÷ ÷Bag materials: polyethylene with anti-static treatment -- Bag weight: from 5 to 50 kg (11 to 110 lbs) -- Typical footprint: 319"; L x 254"; W x 204 to 242"; H (8100 x 6450 mm x 5180 to 6147mm) -- Bag film thickness: 3.5 to 8 mils (90 μm to 200 μm) -- Empty bale dimensions: 12 to 39" L x 14 to 18.5" W (305 to 990 x 355 to 470 mm) --Compression ratio: 5 : 1

Premier Tech Stretch Hooder / Pallet Wrapping SystemRobust load securing --Creates highly stable pallets --Handles all types of loads --Suited for high-speed production lines --Requires minimal maintenance --Hoods up to 100 loads per hourLate model 2020Includes Conveyors and electrical cabinets

Premier Tech Palletizing Cell with Fonic RobotThe automated palletizer combines two performance technologies to create high-quality pallet loads: the speed and reliability of standard Premier Tech conventional machines with the flexibility of robotic equipment. --This low-maintenance palletizer is specifically engineered for powdery, granular, or bagged products requiring overlapping, squaring, or compressing.Speed: up to 24 units per minuteApplications: bags and bundles

PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

RAPTOR - MINI TG, ...Tire Grinder / ShredderRAPTOR Tire Grinders are the most durable and easy to use Shredders built. Specfications: -- Feed opening: 33" x 36". -- Main motor: 200 HP. -- Size material down to: 3/4". -- Screen size: 3/4". -- Separates steel from rubber: 75% to 80%. -- Capacity: 2 Tons per hour (approx.).Equipped with: -- Full hardened knives. -- Electric control panel. -- Stand and infeed hopper.NOTE: New beearings and seals, a rebuilt gearbox, rebuilt gear reducer, and rebuilt electric motors. New frame and screen, too!

RED SEAL HVAC 960,000 BTU Natural Gas Boiler System in Containerized Boiler Room: -- Specifications:Built by Red Seal HVAC Specialists in 2021 and approved by all relevant Canadian codes and inspections.The container has inputs for natural gas, exhaust chimney, passive makeup air louver, rigid insulation on walls, and an output for an insulated glycol line into your building or intended use.Approximately half of the container is empty space and can be used for storing appropriate items like maintenance tools. -- Natural Gas Boiler:The boiler is a 2004, made in Canada by Allied Boiler, Model # AAE960-N-E-M, Natural Gas, 960,000 BTU Input. Max. Water Pressure/Temp 160psi / 250°F.This boiler system was used to heat a drying oven, a air makeup unit, and had extra capacity for heating truck dock approaches in the winter.

REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.

SAS SCORPION ENGINE PULLER Model SC40 DescriptionIncrease cash recovery from your recycling operationsSAS Forks Scorpion High Speed Motor Puller – Scrap Yard Engine Puller – Auto Recycling Engine Puller – Excellent for self service yards processing vehicles before crushing.Generate revenue:Process end of life vehicles in less than 60 seconds.Pull scrap engines and transmissions in 30 seconds.30% more revenue by separating metals from bodies.1000% more revenue per lb. on wire harness from engine compartment and dash.80% more visibility with a direct line of site from the operator’s window through the forks.Cycle time less than 15 seconds from park to full extension.Serviceable for long life. Replace blades in 3 hours or less.estimated only.Engineered & built for optimum performance:Engineered tough for continuous prying and durability.Hardened pins and bushings and grease-able pivot points for extended service life.Hydraulic hoses and cylinders are protected to minimize potential damage from sharp objects.Built with high strength blades and carriage skid plates for extended service.Clean up of ground debris is a snap with center plow blade.Speed is paramount in this design. Operator uses grapple from the cab, no torches, no personnel needed to hook up chains to pull or move engines. Safer, quicker and less costly removal of engines and transmissions.

Saturn Model 36x20 Slow-Speed Shredder --36" long x 20" wide chamber opening --1/2" knives. -- KYB MRH-30-SW2 hydraulic system powered by a 50-hp three-phase electric motor. --Comes equipped with stand and controls. -- Excellent for plastic, E-scrap, rubber, small tires, paper, cardboard, light metals.

SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.

SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- Mellott Vibrating Conveyor -- Main drive motor: 75 HP -- Hammer width approx. 1-1/4" wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel.MANUFACTURER'S STATED KEY FEATURES:&#9679 Heavy-Duty plate construction with replaceable liner plates. &#9679 Heavy-Duty grates available in a variety of sizes. &#9679 Heavy-Duty rotor assembly. &#9679 24" dia. x 3" thick flywheel. &#9679 Built-in fan conveys material up to 50' vertically and 100' horizontally.&#9679 Reversible anvil. &#9679 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: &#9679 The" HZF Series" Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as: Rippings, edging, and trim blocks. Available in (4) standard sizes from 10" to 36" wide.&#9679 Each model features a built-in fan driven off of the main mill shaft, saving energy and valuable floor space while also significantly increasing production.

Something "Free" and "No Strings Attached"....Really. We can be your partner for providing you solution on your next expansion or modification project, we can save your time and money by helping you answer questions such as... -- What packaging equipment do I need ? -- What is the most cost efficient way of doing the same? -- Can my equipment be upgrade to re-use ? -- How much will a Turnkey project cost? -- Where do I start ? -- Don't do it alone. Put our specialized expertise to work for you as you plan your next project. -- At Ex-Factory we offer complete expertise and integrated solution for bulk solid packaging system, automation & warehouse management. -- Your satisfaction our commitment. -- Call us today for a FREE evaluation.

ALJON - 400XL, ...Logger/BalerSpecifications: --Scrap Metal (average): 6 - 10+ Metric tons/Hr. -- Approx. (14,500) hours.Dimensions: --Height: 13 Ft. - 6 in. (4,115 mm). --Width: 8 Ft. (2,438 mm). --Length: 39 Ft. (11,887 mm). --Weight: 61,850 Lbs (28,055 kG). --Tires: 11:00 x 22.5 Tubeless Radial Tire. --Loading Area: 8 Ft. (2,438 mm) x 12 ft. 4 in. (3,759 mm). --Log Size: 20 In. (508 mm) high x 32 in. (813 mm) wide x variable length. --Density: 25 - 60 Lbs/cu. ft (400 - 961 kG/cbm).Material Handler --23 Ft. (7,010 mm) Boom Reach. --The "400XL" Baler’s curved box design and larger loading chamber efficiently process: Bulky loose scrap, white goods, and gauge material down to manageable 20 in. (508 mm) x 32 in. (813 mm) x variable bundles; 20 in. (508 mm) minimum. The operator controls the 3-way compression process from the cab.Final compression is fully automatic. Increased hydraulic power allows the operator to sort & stack material during the automatic baling cycle, eliminating lost labor time and minimizing the labor cost per ton. -- NOTE: The main piston needs work (leaking), and (1) piston that closes the box needs to be rebuilt.See the attached literature for detailed technical specifications.

ALJON - IMPACT V, Used Car CrusherElectric but includes generator and trailer, Includes RemoteOnly 1,470 HoursSpecifications: -- 40-Gallon Diesel Tank. -- Loading Area: 84" W x 240" L. -- Overall Dimensions: 43' L x 8' W x 13-1/2' H. -- 8" Bore cylinder, 5" dia. shaft. -- 81" Stroke cylinder. -- 301,600 Lbs Total combined Cylinder Force. -- 3,250 PSI.