AUTOQUIP 48S80 SCISSOR LIFT.8,000 Lbs Cap., electro-hydraulic operation. -- Standard 24" x 64" smooth steel platform. -- 7.5" Lowered height, 48" travel to raised height of 55.5"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S25 Scissor Lift.2,500 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held, push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S40 Scissor Lift.4,000 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 120" smooth steel platform top. -- 36" Travel with a 6.5" lowered height and a 42.5" raised height; (25) Sec up and down speed. Base frame 24" x 98". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 144" smooth steel platform top. -- 48" Travel with a 7" lowered height and a 55" raised height; (32) Sec up and down speed. Base frame 24" x 130". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.

BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

BALEMASTER - 760AO, ...Horizontal Closed Door BalerSpecifications: -- Cylinders: (2) 6" -- Feed opening: 60" x 40" -- Bale size: 48" x 72" x 34" -- Main motor: 25 HPEquipped with: -- (4) Wire single-loop bale ties -- Heat exchanger -- Photo-eyeNote: Dog ear springs need to be replaced and a small leak by the motor; otherwise, in great condition.

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER - HD-60, ...Closed Door BalerSpecifications: -- Main motor: 20 HP -- 8" Cylinder -- Bale size 48" x 30" x 60" -- Feed opening: 57" x 35"Equipped with: -- Touchscreen controls with ALLEN BRADLEY - Micrologix, ... PLC 7" QuickPanel -- Electrical disconnect switch installed on Baler -- Ground feed oversized hopper -- Totally enclosed fan cooled (TEFC) High-Efficiency motor -- Windowed Feed Chute Door with control circuit Interrupter (Limit Switch) -- Shear Blade -- Cycling eye mounted in the frame -- Low Oil Level & Hot Oil Temperature Sensors

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) Drum Adapter Kits for drum collection, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive centrifugal fan assembly @ 7" static pressure. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 16" Inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags, 23.5" dia. x 64" L with 175 sq. ft. total cloth filter area and (5) Filter sleeves for 55 US-gal. drums (Not included) for collection. -- Wired Magnetic starter. -- Non-sparking Heavy-Duty cast aluminum impeller. -- 20 HP, Standard Blower with 5,000 CFM at 3,600 RPM -- Additional options and voltages available.

BELFAB NBM4-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (4) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (4) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Air Compressor Specifications: Cap. 51.8 CFM, Max. pressure 175 PSI. Complete with: 120 Gallon Cap. 24” Dia. x 60” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.