EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 24 of 32
634 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
Selco HLO-608-A40  Banding-Strapping Machine
$79,000

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

 704-841-2001

 Call
Selco HLO-608-50  Banding-Strapping Machine
Call for Price

SELCO - HLO-608-A40: Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72";. -- Main motor: 50 HP. -- Cylinder: 8". -- Twister motor: 2 HP. -- Cooler motor: 2 HP. -- (4) Tension cylinders: 5" Bore.Available NOW!

 704-841-2001

 Call
Selco HSO-128A50  Banding-Strapping Machine
Call for Price

SELCO HSO-128A50: Horizontal Auto-Tie Baler -- Type: Open end. -- Cylinder: 8". -- Motor: 50 HP. -- Infeed opening: 36" x 28-1/2". -- Bale size: 30" x 40" x Variable. -- Bale weight: Up to 1,200 Lbs (OCC). -- Production capacity: 2 to 4-1/2 TPH. -- Shear blade. -- Hopper size: 36" x 28-1/2". -- Ram face pressure: 103 PSI. -- System pressure: 2,400 PSI. -- Platen force: 120,637 Lbs. -- Cycle time: 11-1/2 Sec (no load).

 704-841-2001

 Call
Selco HL-50  Banding-Strapping Machine
$29,500

SELCO - HL50: Horizontal Closed Door BalerSpecifications: -- Large corrugated wide-mouth Baler. -- Horizontal Closed Door. -- Max. amps: Draw 48 amp; max. motor: 39 amp. -- Max HP motor: 30 HP – 60 Hz – 3 phase. -- Bale size: 72″ x 36″ x 48″. -- Feed opening: 50″ x 46″. -- Main pump: 800 PSI. -- Hydraulic pump capacity: 54 GPM. -- Oil reservoir capacity: 180 Gal. -- Cycle time: 20 Sec. -- Ramface pressure: 68 PSI. -- Baling material weight: 1,500 – 1,800 Lbs. -- Bale volume: 72 Cu. ft. -- Main cylinder: 7″ Bore; 62″ stroke. -- Door cylinder: 4″ Bore; 12″ stroke.

 704-841-2001

 Call
1995 Selco HS0-128A  Banding-Strapping Machine
$49,900

SELCO - HS0-128A, ...Horizontal Auto-Tie Baler -- Motor: 50 HP -- Cylinder: 8" -- Feed Opening: 36" x 28" -- Conveyor NOT included -- Loaded onto your Truck

 704-841-2001

 Call
Selco MODEL HL-12-LH  Banding-Strapping Machine
Call for Price

SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.

 704-841-2001

 Call
2016 SEVEIN 12KVA  Electrical
$750

SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.

 704-841-2001

 Call
Shred Tech ST-20  Hogs and Wood Grinders
$25,950

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

 704-841-2001

 Call
2019 Shred Tech ST-100  Hogs and Wood Grinders
$155,000

SHRED-TECH - ST100, ...Dual Shaft ShredderNew in 2019Specifications: -- Motors: (2) 50 HP. -- Cutter width: 1.5" Approx. -- Cutting Chamber: 32" x 60". -- Control Panel. -- Mounted on stand. -- The ST-100 Industrial Shredder is a complex, heavy-duty shredder machine that features a 32"; x 60"; cutting chamber, enabling it to handle a wide range of products and bulky wastes. It can tear through tougher loads, such as wooden pallets, metals, hazardous wastes, passenger tires, and more.Once these products go through our shredder, they end up in a smaller, optimum shred size. It works with a large-duty throughput of up to 3 tons per hour, working much more efficiently for the business

 704-841-2001

 Call
Shred Tech ST-50  Hogs and Wood Grinders
Call for Price

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.Can be shown under power.

 704-841-2001

 Call
Shred-Pak AZ-45  Hogs and Wood Grinders
$23,950

SHREDPAX AZ-45 Dual Shaft ShredderSpecifications: -- QTY 2 20 HP Motor -- Voltage 480 V, 60 Cy, 3-Ph. -- Dual Shaft -- Support Stand IncludedLoaded on your truck

 704-841-2001

 Call
Shred-Pak AZ-80  Hogs and Wood Grinders
$63,900

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

 704-841-2001

 Call
Siemens 75 KVA  Electrical
$4,950

SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!

 704-841-2001

 Call
1997 Sierra 700T  Banding-Strapping Machine
Call for Price

SIERRA - 700T: Shear BalerSpecifications: -- Motors: (2) Electric 100 HP. -- Preload Table. -- Precompression. -- Shearing: 14 - 17 Tons per hour. -- Baling: 12 - 14 Tons per hour. -- Logging: 15 - 17 Tons per hour. -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 Ft. x 8 in. x 7-2/3 ft. Open: 19 Ft.; 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat -- Disassembled approx. (3) years ago. -- Running when removed from service.

 704-841-2001

 Call
2020 Sierra RB6000  Banding-Strapping Machine
$425,000

SIERRA - RB6000, ...Portable Baler/Logger - New in 2020Approx 9,300 HoursThe RB6000’s automatic baling and logging cycles keep you at peak efficiency. Baling: 12 - 16 Tons per hourLogging: 18 - 22 Tons per hourAutomobile Logging: 26 - 32 Tons per hourThe RB6000 baler/logger is a beast on automobiles, appliances, and lightweight sheet iron; producing logs with the density you need to meet max weight. Looking to produce mil-spec bales?The RB6000’s cylinder comes within 18 inches of each other allowing you to densely bale clips and busheling to mill specifications.Average Bale and Log specifications:Bales: Size (40 in. X 24 in. X Variable), Weight (850 lbs.)Logs: Size (40 in. X 24 in. X Variable), Weight (1200 - 1400 lbs.)The portability of the RB6000 baler/logger gives you the versatility you need with the capability of being moved to multiple locations or to different areas within the same location.The hydraulic powered outriggers provide the needed stability to handle the heavy weight of the machine.

 704-841-2001

 Call
2019 Sierra T556SLK  Banding-Strapping Machine
$559,000

SIERRA T556SLK Shear/Baler/LoggerApproximately 3500 hours only!The T556SLK shear/baler/logger was designed with strength, mobility, and time efficiency. It is available diesel or electric and is a true workhorse that doesn’t require a special foundation. After a two-day assembly process, it is ready to work for you. Easily transportable, the SLK series can be easily taken from yard to yard, and there is no need for an operator as they come fully equipped with remote-control operation.With 556 tons of cutting force, the T556SLK Shear/Baler/Logger has unmatched versatility and is ideal for scrap processors, C&D facilities, and Demolition contractors.Shear:Foundry scrap, pipe, beams, plate, HMS #1, HMS #2Shearing production: 16 - 22 tons per hourBale:Clean sheet, wire, lightweight scrap, tin, clipsSize (31"; x 25 x Variable), Weight (900 lbs. average)Baling production: 16 - 22 tons per hourLog:Appliances, automobiles, sheet metal, tinSize (31"; x 25"; x Variable), Weight (1200 lbs. average)Logging production: 18 - 22 tons per hourAs with all Sierra machines, the T556SLK is expertly manufactured with an innovative L-Box-shaped design, 11/16th-inch replaceable abrasion-resistant steel HARDOX "450" liner plates, and outer honeycomb construction, creating greater box integrity.

 704-841-2001

 Call
2025 Cantek MRS-175  Gang Rip Saw
$61,700

CANTEK MODEL MRS-175 6.9"; THICK CUTTING HEAVY-DUTY GANG RIPSAW: -- FEATURES: -- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations -- Precision chain and rails (dip chain) system facilitates straight line cutting -- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality. -- Motorized saw arbor and thickness adjustment for operator convenience. -- Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood. -- A digitally controller lubrication unit is provided to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically. -- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically. This prevents the potential damaged to the saw arbor and/or blades and also prolongs blade life up to 20%. -- Variable feed speed adjustment by frequency inverter from the front of the machine. -- Please note. with safety cover non-CE -- Measurement: 255x210x170(cm)N.W./G.W.:3,150KGS/3,350KGS -- SPECIFICATIONS -- Max. cutting thickness, 6.9"; -- Max. cutting width, 13-3/4"; -- Fixed inside blade to column, 14.9"; -- Min. working length, 27-1/2"; -- Max. saw blade diameter, 14"; to 18"; -- Sawblade bore, 70 mm or 90mm – double keyed -- Saw arbor diameter, 70 mm without sleeve - 90mm with sleeve -- Saw arbor speed, 2500 RPM -- Saw arbor motor, 75 HP (100 HP optional) -- Saw arbor elevation motor, 1/2 HP -- Feed motor, 3 HP (5HP optional) -- Variable feed speed, 8 – 80 FPM (higher speed optional) -- Powered raise & lower of rolls, 1/2 HP -- Dust hood dia., 8"; -- Table height (pass line), 29.3"; -- Electrics – to UL/CSA standards 230/460 or 575-volt, 3-phase, 60-cycle -- Table area (L x W), 72.4"; x 31.1"; -- Overall dimensions (L x W x H), 95.5"; x 90.5"; x 63";, Net weight 6,600 lbs.

 704-841-2001

 Call
2022 Cantek MRS-300  Gang Rip Saw
$29,800

CANTEK MRS 300 Chain Feed Gang Rip Saw.General Description: -- Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability. -- Straight line caterpillar style feeding with heavy guided chain. Chain blocks are special cast iron with heat treated & precision ground pins. -- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve.Features & Includes: -- (3) Sets of Anti-Kickback Fingers, (2) top, (1) bottom. -- Powered Rise & Fall to the pressure rollers. -- New style round Fence Bar support with quick shift long fence. -- Automatic Centralized lubrication system. -- Automatic STAR-DELTA Starter (slow speed start) and low voltage controls. -- CE Style European guard & safety features. -- Long fence for control of long material.Specifications: -- Max. Working Thickness of 4 5/8"; (120 mm) with 15"; Blade diameter. -- Min. Length of 20"; standard or 12" with short stock attachment. -- Saw Sleeve Usable Length (between outside saws) is 12" (305 mm). -- Saw Blade Diameter is 200 - 350 mm (8"; - 14";). -- Saw arbor sleeve OD (diameter) is 70 mm; Saw arbor diameter is 50 mm. -- Saw arbor vertical adjustment is 3.6"; (90 mm). -- Saw Motor is 50 HP – Saw Arbor Speed is 3,800 RPM. -- Powered Pressure Rollers (Rise/Fall), 0.5 HP motor. -- Feed Speeds from 25 - 100 FPM (8 - 39 MPM); Feed Motor has 2 HP drive. -- Table Size is 30"; x 60"; Table Height from floor 33-1/2". -- Included: FP INDUST. Laser light on infeed, (2) 6"; Dia. Dust Hoods and (1) Removable saw sleeve, (1) set of spacers.NOTES: It still has the original packing grease on it.

 704-841-2001

 Call
2025 Cantek MRS-300A  Gang Rip Saw
$35,400

CANTEK MRS 300 Multi Blade (Gang) Rip Saw: General Description: -- Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability. -- Straight line caterpillar style feeding with heavy guided chain. Chain blocks are special cast iron with heat treated & precision ground pins. -- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve.Features & Includes: -- (3) Sets of Anti-Kickback Fingers (2) top, (1) bottom. -- Powered Rise & Fall to the pressure rollers. -- New style round Fence Bar support with quick shift long fence. -- Automatic Centralized lubrication system. -- Automatic Star-Delta Starter (slow speed start) and low voltage controls. -- C.E style European guard & safety features. -- Long fence for control of long material. -- Electrics to 230/460 or 575 Volts, 3-Phase, 60 Cycles.Specifications: -- Max. Working Thickness, 4 5/8"; (120 mm) with 15"; Blade diameter. -- Min. Length, 20"; standard or 12" with short stock attachment. -- Saw Sleeve Usable Length(between outside saws), 12" (305 mm). -- Sawblade Dia., 200 to 350 mm (8"; to 14";). -- Saw arbor Sleeve OD (Diameter), 70 mm; Saw arbor diameter, 50 mm. -- Saw arbor vertical adjustment, 3.6"; (90 mm).Equipped with: -- 50 HP Saw Motor – Saw Arbor Speed 3,800 RPM. -- Powered Pressure Rollers (Rise/Fall), 1/2 HP motor. -- Feed Speeds 25 - 100 FPM (8 - 39 MPM); Feed Motor with 2 HP drive. -- (2) 6"; Dia. Dust Hood. -- Table Size, 30"; x 60"; Table Height from floor 33.5".Other Information: -- Net Weight, 4,510 Lbs, Shipping Weight, 5,060 Lbs - Machine Dimensions, 82.68"; 59"; x 56.5", Shipping dimensions, 71"; x 67"; x 63";. -- Included: (1) Removable saw sleeve, (1) Set of (38) spacers; NOTE: Saw blades not included.OPTIONAL EXTRAS - AVAILABLE:Short Stock & Thin material cutting attachment12"-300mm min. length & 3.75" - 95mm max. thickness (can be added and/or used at any time) (Required for high accuracy cutting) (CANMRS300A-SHT-STK)....................................................................................................................................... $ 620.00 20mW Laser (FP MLC1320W) & Laser Holder w/6"; Bolt on Base-Stand(FP MBN03-XF8000)............................................................................................................ $ 1,020.00 OPTIONAL EXTRAS – AVAILABLE (Cont’d):NEW – Single Blade Mechanical Quick Lock Collars that can be used on the 70mm sleeve for individual blade quick setting and locking process (no spacers required) – This is desirable especially if you have to quick change from size to size and you don’t have the spacers to run a special size of product (Each CANMRS300-AM36-045-0).................................................................................................. $ 210.00 Extra for spare saw sleeve (CANMRS300A-SLEEVE)...................................................... $ 590.00Extra for spare set (38

 704-841-2001

 Call
2025 Cantek MRS-340M-1  Gang Rip Saw
Call for Price

CANTEK MRS-340M-1 GANG RIPSAW WITH (1) SHIFTING BLADE and the following specifications and features: Capacities are: -- 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws. 25.6" max. overall width; -- 5.5" Max. distance to fence from inside fixed blade; 0.59" to 13.38" max. saw travel; 23-1/2" min. stock length; 19.7" possible with optional short stock holddodwn (reduces thickness capacity. -- With 70 mm dia. x 13-3/4" long saw arbor powered by a 50 HP motor driving the blades at 3,800 RPM; 3 HP feed motor provides feed speeds from 15 to 135 FPM;1/2 HP lift motor for hold-down roll; infinitely variable saw shifting speeds from 0.78" to 3.15" per second; (2) 15 mW laser lights; (2) 12" or 14" dia. x 90 mm bore blades; 72" x 31" table size sits 30" from the floor. Features include: -- Cast iron main frame with main parts enclosed to ensure protection and perfect stability; HD precision straight line caterpillar type feed chain with easily replaceable bolt-in cast steel or Urethane chain ads (optional); -- Fully programmable position sets (10) programs of (10) sets each or infinitely variable foot pedal position set; user friendly Touch Screen control (free standing operators control console) is integrated with 32 bit micro processor and (2) RS232 ports for incredible positioning speeds and EXACT blade positioning. -- Touch Screen with full and easy programming capabilities and joystick control; saw blade positioning is accomplished by industrial series Servo Motor and control; blade speed is infinitely adjustable from 0.78" to 3.54" IPS to match all operations; blade positioning can be initiated by electronic joystick control (efficient & quick) or the touch screen controls. Equipped to shift (1) saw independently or (2) saws per shifter (optional as a cluster) or with a single or bank of saws with spacers can be set up on the inside of the saw arbor to gang rip if desired. New short stock cutting device included -- Top pressure roll system is electronically positioned from the front control panel for lumber thickness; includes position readout; top roll hold down system is mated to the servo positioning short stock shoe to provide optimum straight line ripping and safety; top rolls are spring tensioned and tension is adjustable (pneumatic pressure is optional). -- Specially designed and Patent Pending Precision Glide Lock with nickel chrome steel saw arbor with super technology for easy maintenance and free saw shifting; (2) shifting saw bushings are equipped with specially designed rollers for most accurate and very fast saw positioning. -- (3) Rows of anti-kickback fingers; variable feeding speeds from 16 to 135 FPM inverter motor and speed control with LED readout; electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage lo

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved