5 HP motor with 8" or 10" blade cap. -- Features: SawStop Safety System, blade stops and retracts on accidental contact, protection is always on, performs continuous self checks, invisible protection, does not interfere with work, compatible with all standard blades; works on all woods and non-conductive materials. -- Includes bypass switch for cutting metal. European style riving knife to minimize kickback; Low profile blade guard for narrow cuts; Quick-change mount for guard and riving knife ÷Large start/stop paddle for hands-free shut off; Main power switch with removable lock-out key; Magnetic contactor motor control; Blade shroud for improved dust collection; Zero-clearance insert; Extra heavy castings ÷Widely spaced trunnions; Infinitely adjustable trunnion assembly for precision alignment. -- Also includes: Vertical slide blade elevation for increased stability; Long-lasting V-ribbed belts; cast iron handwheels; Two access doors in cabinet; Powder-coated cabinet.

SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.

SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- Mellott Vibrating Conveyor -- Main drive motor: 75 HP -- Hammer width approx. 1-1/4" wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel.MANUFACTURER'S STATED KEY FEATURES:&#9679 Heavy-Duty plate construction with replaceable liner plates. &#9679 Heavy-Duty grates available in a variety of sizes. &#9679 Heavy-Duty rotor assembly. &#9679 24" dia. x 3" thick flywheel. &#9679 Built-in fan conveys material up to 50' vertically and 100' horizontally.&#9679 Reversible anvil. &#9679 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: &#9679 The" HZF Series" Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as: Rippings, edging, and trim blocks. Available in (4) standard sizes from 10" to 36" wide.&#9679 Each model features a built-in fan driven off of the main mill shaft, saving energy and valuable floor space while also significantly increasing production.

SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and features: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately 3" wide Swinging Hammers, tip speed 20,700. --Top feed, bottom discharge. --Bottom screen approximate 5040 square inch area. --Clam shell housing. --500 HP, TEFC, 3/60/460 volt, 1785 RPM drive Motor with coupling and shaft guard. --Mounted on a heavy-duty steel Factory Frame. --NOTES: Largest model of the 15 Series. &#9679 Machine weight 16,000 Lbs.

SCHUTTE BUFFALO - Model WA16L, ... HammermillModel# WA16L, 3500 RPM, with filtration system and multiple grates for destruction sizes. -- It also includes Electrical panel. -- This system is apart and palletized. All you have to do is pick it up and transport it to you. -- System was in perfect working order when it was taken apart and palletized for transport. -- The system is perfect for the destruction of computer hard drives and different types of media.

SCM M3 Multi-Blade Dip Chain Gang Rip SawSpecifications: -- 300 mm (11.81") Width cap. -- 110 mm (4.33") Max. depth of cut. -- 8-3/4" Throat depth. -- 390 mm (15.35") Min. stock length. -- 200 - 350 mm (7.87" - 13.78") Blade diameter. -- Arbor dia. 70 mm (2.76"). -- Table size 750 x 1,530 x 750 mm H (29-1/2" x 60.24" x 29-1/2" H). -- Blade speed 4,200 RPM. -- Feed speeds 6 - 48 MPM (19 - 157 FPM).Equipped with: -- 44 kW (60 HP) - 3,554 RPM Blade motor. -- Variable speed drive feed chain motor. (2) Upper infeed & (2) Upper outfeed 4" Dia. rollers, Automatic chain lubrication. -- Top & bottom anti-kickback fingers. -- Main dust hood, with 200 mm (7.87") Dia. outlet. -- 40"; x 2-3/4"; H Adjustable infeed fence. -- Motor load meter.Complete with: -- Operation & Maintenance Manual. -- Tooling (As pictured).

AAF PULSE-PAK 21-3H Pulse-Jet Cartridge Dust Collector. (3H) is three-high filter elements. (21) is the total number of Panel Pak V's.The Panel Pak filter element has two flat panels of pleated media in a Vee-Configuration allowing installation and change-out with minimum time and effort. Each cartridge has its own gasket ensuring a positive, air tight seal. -- Consists of two modules: one containing (9) 3x3 filters and the second contains (12) 4x3 filter cartridges, for a total of (21) cartridges. -- Housing dimensions: 191.75" High (with 48" hopper clearance), 104.25" Wide, 94.25" Depth, and Weighs about 6,400 Lbs. -- Air consumption about 6 cubic feet/hr. at 90 PSI of clean dried air. -- Fan and Airlock available at extra cost. please inquire.

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-let. -- Silencer for TCBI 1010 year manufactures materials and craftsmanship warranty . Made in the USA

ACT 3-12 Cartridge Dust Collector Cartridge style downflow dust collector rated at 6,000 CFM. Heavy-duty with 7 and 10 gauge construction. Specifications: -- Blower, 15 HP rated at 6,000 CFM. -- (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient. -- Reverse pulse filter cleaning system. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with quick-lock easy-access filter doors. -- Magnetic motor starter and disconnect. -- 16" inletEquipped with: -- TCBI 15 HP Blower with direct drive, top mount. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- Drum Lid Latch Ring. -- Motor starter with disconnect. -- 10 year workmanship and materials warranty -- Made in the USA

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

ADVANCE LIFTS P-6036+M Scissor LiftThe P-Series lifts are Advance Lifts most popular series as they fit a wide array of manufacturing applications.SPECIAL FEATURES & BENEFITS: -- These units are equipped with the patented “Platform Centering Devices";, which doubles or triples lift life. -- All of the controllers are Underwriter Laboratory listed assemblies. -- These units are fully primed and finished with a baked enamel finish. -- The cylinders are machine grade with clear plastic return lines. -- All pressure hoses are double wire braid with JIC fittings. -- The reservoirs are mild steel. -- These units conform to all applicable ANSI codes.Specifications: -- 6,000 Lbs. capacity. -- Platform size 36" x 72" (Min. Platform Size: 24" x 48" Max. Platform Size: 48" x 72") -- Max. End Load Capacity 4,100 Lbs. -- Max. Side Load Capacity: 3,500 Lbs. -- Baseframe Size: 24"" x 48". -- Lowered Height: 6.5". -- Raised Height: 42.5". -- Approx. Speed Up: 27 sec. -- Internal Motor: 2 HPWarranty 10 Year Structural / 250,000 Cycles - 1 Yr Parts and Labor

AGET 20SN5157 Cyclone with FT-40 Baghouse2,300 CFM at 9.3" SP; 5 HP Top-mounted blower motor cyclone, 8" inlet dia.,10" outlet diameter. -- Dust particles are pulled through the cyclone with larger particles dropping through the cyclone to dump into collection bin. Finer particles are forced through the Baghouse to filter the remaining air.. -- Includes; 5 HP LEESON ELECTRIC TEFC top-mounted blower, cyclone, AGET "FT-40" Baghouse after-filter, manual slide gate opening and automatic bag shaker which comes on after shut down of collector. -- Interior bag house with (40) 5" dia. x 8' L cloth tubes, total filter area of 383 sq. ft. The larger dust particles are pulled through cyclone into (2) 55-Gal barrel storage with manual slide gate opening at bottom.

AIR CURE 484RF10 Dust Collection System with Rotary Air Lock and Abort Gate.Specifications: -- Filter area capacity 56,000 CFM @ 9:1 Air to Cloth Ratio (ACR), approx. 13'- 2" dia. round baghouse; -- (484) Cloth filter bags of 10' length (3" x 6") oval bags provide for radial movement of bag during cleaning for longer life), 6,180 sq. ft. of filter area. -- Designed for filtration media cleaning via 7.5 HP approx.on board rotary air pump for compressed air operating at about 7.5 PSI. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Rotating cleaning air manifold driven by 1 HP motor, (1) NEMA IV timer & solenoid/diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. Includes: -- Supplied Fan: ALLIED BLOWER & SHT MTL. SIize: 90 MH fan, 38" inlet dia, with paddle wheel blades powered by 250 HP TEFC motor, ground mounted . Note1: This fan is very versatile as it can operate from 10,000 CFM @ 6" or 7" of water SP all the way up to 40,000 CFM @ approc. 14" of water SP depending on RPM chosen. To be conservative one would keep the upper end to around 1,000 RPM. Motor could be 25 HP or 250 HP at these extremes. Being a radial blade fan it is capable of handling most materials. -- Note 2: Depending on application there is filter area capacity to add another Fan/motor for about 16,000 CFM (as per above). -- Explosion doors; walk-in access door on platform at access door. approx. 18" Rotary Air Lock (RAL) and about 38" Abort Gate with separate support stand and access platform.Features: -- 10-Gauge shell all-welded construction, Tangential scroll inlet and Inlet deflector baffle. -- All cages are unbolted to minimize damage and left in the shell. Bags are removed (to reduce weight on cages) and crated - will likely need to be laundered. -- Actual AIR CURE model is 484AC10. -- Note: Upon installation buyer is responsible for compliance to all applicable NFPA or local, state or Federal codes.Transportation also available at extra cost.

AIR CURE 484RF8 Pulse Jet dust Collector.. -- Overall Specs: 30,00 CFM @ 6.1:1 Air-to-cloth ratio, 158" dia. round baghouse with a capacity of (484) cloth filter bags (Bags not Included) of 8' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 4,900 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Filter cleaning: Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: AEROVENT (TWIN CITY) model 330, type CBA-SW Class 4 Backward Inclined Air Handling Blower, Arrangement 9 with 100 HP TEFC motor; Explosion doors; walk-in access door on platform at top and safety ladder. -- Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- Depending on application/desired air capacity it can be increased to about 44,000 CFM (@ 9:1 to Air-to-Cloth ration) but to do so will require slightly larger fan/motor. -- Needs new bags as they were discarded.

AIREWORKS FX-05-2000 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options.Features: -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 2,000 CFM / 7-10 IWG with 16.7:1 air to cloth ratio. Equipped with: -- (5) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 125 Sq. Ft. of cloth filter area and 16.7:1 air to cloth ratio with 40 Gal. of collection capacity. Complete with: -- Direct drive dynamically balanced centrifugal fan assembly with 5 HP TEFC motor, 1,750 RPM, non-sparking Heavy Duty machined & balanced impeller; 11" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX-10-3500 Modular Dust Collection System. The "FX" Series is a self-contained modular designed unit for interior use that utilizes a dynamically balanced fan.Features: -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 3,500 CFM / 7-10 IWG with 14:1 air to cloth ratio. Equipped with: -- (10) 12" x 8' High-Efficiency filter bags up and (2) plastic collection bag down. -- The filter bags have 250 Sq. Ft. of cloth filter area and 13:1 air-to-cloth ratio with 80 Gal. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, 1.750 RPM -- Non-sparking Heavy Duty machined & balanced impeller; 13" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX15-5000 / 2XTB Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction, fully welded plenum built using 11 Ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 5,000 CFM, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.Includes: 2XTB Tipping Bin with (2) inlets. -- Forklift truck moveable with Locking wheels and railings instead of plastic collection bagsPHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS - FX-15-5000: Modular Dust Collector"MOD-FLEX" Technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizes a dynamically balanced fan, TEFC motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with: 16:1 Air-to-cloth ratio. -- Equipped with: (12) 12" x 8' High-Efficiency filter bags; up with 301 sq/ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with: 15 HP TEFC Motor; Heavy-Duty machined & balanced, nonsparking impeller; 15" dia. ductwork inlet. -- Waste collection bin with pneumatic cylinder lift by air switch -- Unit comes with manual motor starter; factory installed wiring from the motor to the starter. -- Sound Level: Less than 80 dB.

AIREWORKS FX-15-5000 Modular Dust Collector. The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizies a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with 16:1 air to cloth ratio. -- Equipped with: (12) 12" x 8' High Efficiency filter bags up with 301 Sq. Ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with 15 HP TEFC motor; Heavy Duty machined & balanced, non-sparking impeller; 15" dia. ductwork inlet, starter. -- Sound Level less than 80 db.

AIREWORKS FX15-5000X3 Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500 CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500 CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200 CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction, fully welded plenum built using 11 Ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 5,000 CFM, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.