WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

Woodtech QSG 650-R-RPA 24" Widebelt (2) Heads24" width cap, Drum, Combination HeadHead configuration1st Head: Contact roll2Nd Head: Combination head (Roller and Pad)Specifications -- 24" Widebelt Service Side: Left -- Working Thickness: 3-150mm -- Minimum Working Length: 460mm -- Feed Speed: 0-19m/miMachine Frame -- Built with rectangular profiled steel beams to give a very high rigidity to the frame;Main motors positioned inside the frame in a protected position -- Machine frame is connected by high strength hardware (8.8G), and welded for maximum rigidityEquipped with & Features -- V-belt drive from main motors to sanding heads, -- Disk brakes on each sanding drum for emergency stopFeed System -- Feed table is made of steel with a surface tolerance within 0.05mm; table polished to avoid wear of the internal side of the feed belt -- Table is heat treated for accuracy and durability -- Feed speed variable in continuous from 0-19m/minNote : Extra BeltsWoodtech Model QSG 650-R-RPA 24" Widebelt

WYSONG & MILES - 315, ...Edge Sander6" x 32" Graphite mocovered wooden platen; double 8" x 34" tilting side tables; full 180° steel end table; tilts and raises & lowers. -- 2 HP Motor; direct drive motor.

WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.Equipped with: -- (2) 11-1/2" x 62" Cast iron side tables and (1) cast iron end table; tables tilt 30° up & 45° down; 5" vertical table travel w/hand wheel adjustment, 5" lateral side table travel w/hand wheel adjustment, 4-1/2" lateral end table travel w/handwheel adjustment. -- 10" Dia. x 10-1/2" face direct drive pulley, 4-1/2" dia. x 10-1/2" idle pulley. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.

WYSONG & MILES - 284, ...Hollow Chisel MortiserThis Heavy-Duty American made Mortiser is a well functioning machine with a 5 HP motor. -- Works like a smooth running clock; a great machine for doing all types of mortises, and it is bulletproof.Note from the seller: Nice 284 complete with a selection of 1/4, 3/8, and 1/2" chisels, bits, collets, and bushings. Runs smoothly, ready to work. Those who have used them will agree that this is the best hollow chisel mortiser made, and easy on your legs if you have a lot of mortising to do.. 220/440/3/60, now 220.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6m WYSONG & MILES 284 Automatic Vertical Hollow Chisel Mortiser Specifications: Max. chisel dia. 1-1/4", Max. bit dia. 5/8". Throat 6-1/4”. Max. distance from table to chisel 16". Table size 8” x 42”, with Tilt 45° Left & Right. Longitudinal table travel 13", Cross table travel 3-3/4", Vertical table travel 12". Max. chisel stroke 4-1/4". Speeds 15, 30, & 45 SPM. Equipped with: 5 HP - 3,480 RPM Spindle Motor. 1-1/2 HP Feed motor. (2) Stroke stops. Spacing gauge, with (6) Adjustable spring stops. Screw clamp. (2) Hold-downs. Foot pedal for Single stroke or continuous operation. Complete with: Fence.

AUTOQUIP 60S60 Scissor Lift.6,000 Lbs. Cap., electro-hydraulic operation. -- Large 48" x 120" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S100 Scissor Lift10,000 Lbs Cap., electro-hydraulic operation. -- Standard 32" x 90" smooth steel platform. Base frame 32" x 87". -- 12" Lowered height, 60" travel to raised height of 72"; internally mounted 5 HP Super Torque TENV motor, 2.8 GPM, 2-cylinder design, (36) Sec travel time up-or-down. -- Complete with: Wall mount up/down push button control with 20' cord (pre-wired), velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S60 Scissor Lift;6,000 Lbs Capacity and electro-hydraulic operation. -- 36" x 60" Smooth steel platform. Base frame is 24" x 48". -- 6.5" Lowered height, 25 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 2-cylinder design. -- Complete with: Hand held control pendant.Autoquip Series 35, Surface mounted lift.

AUTOQUIP 48S80 SCISSOR LIFT.8,000 Lbs Cap., electro-hydraulic operation. -- Standard 24" x 64" smooth steel platform. -- 7.5" Lowered height, 48" travel to raised height of 55.5"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S25 Scissor Lift.2,500 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held, push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S40 Scissor Lift.4,000 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 120" smooth steel platform top. -- 36" Travel with a 6.5" lowered height and a 42.5" raised height; (25) Sec up and down speed. Base frame 24" x 98". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 144" smooth steel platform top. -- 48" Travel with a 7" lowered height and a 55" raised height; (32) Sec up and down speed. Base frame 24" x 130". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

AYEN EXPERT-P Construction & Line Boring MachineSpecifications: 9-Spindle head tilts/swivels for horizontal or vertical operation or any angle in between and traverses left-to-right for (18) or (27) hole lines; -- 2 HP - 2,800 RPM motor, full cycle operation, (3) Sec cycle time, 34" max. drilling width, 4" max. clamping height.Features: -- Designed with a unique "shuttling" drill head that slides left-to-right on precision linear bearings, heavy-duty positive stops ensure accuracy. -- (2) 1-Meter combination infeed/line fences, (1) 1-meter rear fence, mirror-image fence setting gauge, (2) universal flip stops, (2) cutaway flip stops, (2) edge-type layout gauges, (3) synchronized air hold-downs, (2) pin stops, and dual foot pedal actuated control. -- Heavy-duty positive stops ensure accuracy. -- Complete with: Left & right fences with stops, (3) synchronized air hold downs, and foot pedal control.

AYEN SKB-50 Construction Hole Boring Machine for 32 MM System Boring; -- 50-Spindles total in (2) swivel heads with (25) spindles each, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°. -- Equipped with: 50-Spindle swivel head assembly converts quickly into (2) 25-spindle heads for double line boring, 5 1/8" min. distance between heads when line boring. -- Features: 3 HP - 3,450 RPM gear box motor, 39" panel width cap. with a 30-1/4" drilling width. -- Complete with: (2) 39" Fences with flip stops, (3) pneumatic quick-set hold-down clamps, quick fence setting gage, foot pedal control for drilling cycle / head positioning.

BACCI MOA Single Table MortiserMortises or bores holes on chairs, furniture or case goods. -- Single table and spindle, -- 3 HP - 9,500 RPM motor with (200) oscillations/Min. Features: -- 9" x 19" Table tilting +/- 20° (side-to-side), -- (1) adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6o BACCI MOD Double-Sided Oscillating Slot Mortiser Specifications: Max. slot depth 80 mm (3.15"), Max. slot length 4-3/8". Chuck size 16 mm (0.63"). Max tool dia. 50 mm (1.97"). Vertical table adjustment 100 mm (3.94"). Oscillation range 120 mm (4.72"). Oscillation speed 224 OPM. Equipped with: (2) 8” x 19-1/2” Tables, Each with Tilt 20° Left & Right. 3 HP - 9,500 RPM Spindle motor, 3 HP Oscillation motor. Hydraulic table feed. (2) Pneumatic hold-downs.

--In Auction: https://exfactoryauctions.com/Detail/LC-230120/event/A122024$1--NO RESERVE!-- --SUPER RARE MACHINE-- BACCI T4M-O 4-Spindle Asymmetric Copy Lathe, with Sanding & Enclosure Specifications: Distance between spindle centers 170 mm (6.69"). Max. working height 165 mm (6.50"), Max. copying length 1000 mm (39.37"). Standard cutter dia. 35 mm (1.38"). Cutter holder dia. 145 mm (5.71"). Cutter holder speed 5,300 RPM. Spindle speeds 25 & 42 RPM. Carriage speeds 75 - 200 mm/Min. (2.95 to 7.87 IPM). Equipped with: (4) Duplicating/carving/copy spindles. Complete with: (4) 130 mm (5.12") W Copy Belt Sanders for asymmetrical parts, with 130 x 990 mm (5.12" x 38.98") Belts. 114" x 92" x 88" H Enclosure. NOTE: Larger diameters possible by using every second carriage position, ie. (2) heads instead of (4) heads. Machine weight: 3,330 Lbs. Enclosure weight: 775 Lbs.

Bacci Artist Jet 6-Axes Machining Centre CNC - Installed New in 2019Description: Bacci, 6 Axis, ARTIST JET CNC Machining Centre with twin shuttle tables specially configured for clamping and cutting solid wood furniture parts.Specifications: X = 3,500 mm (pass through distance between the columns is 3,050mm) Y = 2,200 mm Z = 830 mm B = unlimited C = 400° (+/-200°) Rotating revolver head with two (2) 10Hp, double ended electro-spindles, ER32 tool connections, ceramic bearings, 24,000 maximum RPM provides fast 4-tool action Two (2) Electronic Inverters to independently control the spindle's rotation speed up to 24,000RPM Two (2) “TGV"; type working tables (Paolino Bacci patent), each table with three (3) 750mm long steel rails, adjustable center to center (C/C) distance up to 1,170mm The support surface for each table is 1,170mm x 750mm Semi-Automatic X-Axis positioning of the “TGV"; rails is included Eight (8) Pneumatic Clamping Cylinders, sliding on the sides of the “TGV"; rails The Artist/Jet is prepared for vacuum Clamping One (1) 100m3/h vacuum pumps is included Six (6) removable, frontal Free-Jig clamps Factory electrical parts upgraded for 2021 CSA electrical compliance.