GOODSPEED HF 412 AO Vertical Oscillating Chair Back Sander Specifications: Table size 30” x 30” x 34-1/4” H. Equipped with: 12" W x 25" L Horizontal abrasive belt, with 12” H x 4” Dia. Aluminum & Spiral rubber drums, 12” H x 3-1/2” Dia. Spiral rubber feed drum, with 2 HP Motor & Variable feed speed control. 60 W Feed & Oscillation motors.

GOODSPEED FH30 Semi-Automatic Copy Lathe. Specifications: --30" Cap. with a 3" max. dia., hopper feed for square or round stock, 15 HP main spindle motor for 2,250 - 3,200 - 3,825 & 4,625 RPM; reciprocating tail spindle. -- 2 HP Hydraulic feed on back knife; up to (900) pieces/Hr capacity. -- Complete with: Carriage slow down control system, pressure lubrication die system, 2-belt head spindle drive, and adjustable knife bar for cutting tapers. -- Includes: Pneumatic steady rest; Custom pressure reducer; used tooling and extras. -- Original manual included. -- Was used for making drumsticks.

INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;Specifications: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). -- (2) Hydraulic copiers. -- Max. size of square stock for turning with automatic feed 100 mm (3.9"). -- (3) Tool holder turrets. Hopper feed unit. -- (8) Head speeds in a range from 750 - 5,500 RPM. -- 6 HP or 7.5 HP Headstock spindle motor. -- 4 HP Hydraulic pump motor.

GRAINMATIC - CP-960, ...2-Head Wide Belt Sander42" Width cap.; Drum, Platen.Head Configuration:1st Head: Spiral rubber covered contact roll, 7-7/8" dia., 20 HP motor.2nd Head: Combination Head, spiral rubber contact roll, and finishing platen; 15 HP motor.Specifications: -- 36" W x 75" L abrasive belts with air jet tracking. -- Motorized part thickness adjustment with keypad entry and LED readout; 0" - 7" opening. -- Infeed & outfeed spring loaded rubber covered holddown rolls. -- Feed Motor: 3.5 HP -- Variable feed speed: 15 - 60 FPM.Equipped with & Features: -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. --12" Infeed load area. --Volt meters on sanding head motors.NOTE: Some specs need to be verified.

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator NO MOTOR, LID OR DRIVE TRAINSpecifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAR

GRASS - ECOPRESS P: Boring Machine (Hinge) -- SpecificationsPneumatic tabletop unit mounted on welded frame base; hinge boring w/GRASS inserter block.(1) 3-Spindle boring head for hinges; 1 HP motor. -- Drill unit & insertion head and (2) spring loaded holddown cylinders operate pneumatically. Boring depth automatically sets to the material thickness being processed. -- Complete with: &#9679 450 x 730 mm Extruded aluminum framework table.&#9679 LH & RH material side stops. -- Actual Model: GRASS ECOPRESS P

GRASS - RAM, ...Drawer PressPneumatic Drawer Press used for pressing & inserting the GRASS SARGEN slide. -- Tabletop mount, foot pedal activation. -- NOTE: Machine is shown "as it is". Additional aluminum base frame was NOT shipped with this machine.

GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press systemSpecifications: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 30 mm - 159 mm (1.2" - 6.25") -- Timber Thickness 12 mm - 80 mm (.5" - 3.15") -- Timber Length 250 mm - 1780 mm (9.84" - 70") -- Infeed Belt Conveyor 20" Wide X 34" LongAfter the Finger joint shaper: -- Manual Roll Conveyor with Rotation for Turning Workpieces 22" X 68" -- Outfeed Belt Conveyor 20" X 39" -- Driven Roll Conveyor 20" X 120" -- Powered Belt Conveyor Prior to Press 7" X 86"Model Press PJ 10/6100 Finger Joint Assembly Press: -- Maximum Pressing Length 240" -- Cut-Off Saw Motor 3HPNote: The machine will be reconditioned upon placement of order.

GREDA MITIKA V1500 5-Axes Machining Center - Milling/Routing/Boring/Turning/Sanding. -- Dimensional Capacity: - Max Working Diameter: 500 mm.- Max Working Length: 2,500 mm.- X-Axis Working Stroke: 2,700 mm.- Y-Axis Working Stroke: 375 mm.- V-Axis Working Stroke: 650 mm.- Z-Axis Working Stroke: 630 mm.- B-Axis ( Electro-spindle) Tilting: +/-90 Degrees.- A-Axis (Lathe): Endless. -- SPEEDS: - Max Advancing Speed in Rapid Mode: 75 M/Min.- Rotation Speed from 0-1,000 RPM. -- DRIVES:- Vertical Sanding Unit: 0.5 kW (0.67 HP) 3,600 RPM.- Horizontal Sanding Unit: 4 KW (5 HP) 3,600 RPM.- Milling Unit: 11 KW (15 HP) 9,000 RPM.- Turning Unit: 11 KW (15 HP) 4,500 RPM.- 4-Axis Routing Unit: 11 KW Electro-spindle (15 HP) 24,000 RPM.- (12) Position Tool Changer - HSK F 63 with 11 KW Inverter.- Milling Unit: 11 KW (15 HP) Motor - 9,000RPM with 11 KW Inverter.- Milling Diameter: 125 mm.- Milling Height: 180 mm.- Milling Shaft Diameter: 40 mm.- Vertical Turning Unit: 11 KW (15 HP) Motor - 4,500 RPM with 11 KW Inverter.- Saw-Blade Max Diameter: 300 mm.- Saw-Blade Shaft Max Diameter: 35 mm. -- Other Data: - Horizontal Oscillating Sanding Belt Length: 2,500 mm.- Vertical Sanding Belt Length: 850 mm- Independent Middle Rollers for Narrow Radius - 40 mm- Tampon Diameter: 100 m- Tampon Height: 180 mm- Tampon Shaft Diameter: 30 mm- Lathe System:- Full NC-Controlled Centre and tailstock device.- Max Loading Piece Diameter: 500 mm.- Endless Rotation as Interpolating Axis (A-Axis).- Min/Max Loading Length: 250/2000 mm.- Min/Max Cross-Section of parts to be loaded (automatic mode):40x40 mm/150x150 mm. -- Features: - (1) Gouge Unit.- Automatic Hopper Loading/Unloading System.- waste discharge conveyor belt with dust collection chute.- floor standing CNC and Electrical controls panel. -- Estimated 2,000 hours. -- Overall Dimensions/Weight: - 5,000 x 3,200 x 2,500 mm. Approx. weight 5,000 KG (11,000 Lbs.).

IMA ADVANTAGE 500 L EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Production Edgebander -- Specifications:Edgebanding capacity: Coiled material 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped With:Premill Unit - 08.379 with: 4 kW x 2 (5.3 HP x 2) 9,000 RPM Vertical joining spindles, SIKO digital readouts, particle & debris air jet blower. -- Glue System - EVA (Hot Melt) with: "Quick-Lock" System. -- Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations:End Trimming Unit - 08.415: Dual motor, 0.66 kW x 2 (0.88 HP x 2) suspended from the hold-down beam; automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit - 08.055: Top & Bottom flush trimming, W 1.0 x 2 (HP 1.34 x 2) - 12,000 RPM ea. motor; against the feed (up-milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit - CT U-L: Multiuse, Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W; 12,000 RPM. -- Profile Scraper Unit - 08.519: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit - 08.521: Flat, Top & Bottom self-tracing Glue Scraper. -- Buffing Unit - 08.617-2: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. -- Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge.Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations.Complete with:Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station. -- Actual Model is IMA ADVANTAGE 500 L

IMA - HKA CONTOUR EDGEBANDER: Specifications: -- Manually operated Contour Edgebander. -- Designed for straight or curved (contour) edgebanding with: 0.5 - 3 mm Edgebanding thickness, 16 - 45 mm panel & banding height, 23 - 45 mm min. strip width; 100 mm min. panel width; 250 mm min. strip length. -- Equipped with: Versatile glue head can be fixed to 1-side of the table allows operator to manually manipulate smaller pieces.During "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine. -- Work Table:32" (800 mm) Dia. coil dispensing table, large worktable surface (approx. 36" x 36"); Pre-selection counter for edgebanding material; (1) preheating unit with 600 Watts for preheating of PVC/ABS edges -- Operating Process:Floating edgebanding head is clamped to panel to be processed, precut strip of edgebanding material is fed into glue head,Operator guides head around workpiece, glue is directly applied to precut strip of edgebanding material up to end of strip. -- Features: "Floating head/glue pot" unit (hot melt) with 0.5 Liter cap; Guillotine knife for PVC material (within floating head). -- Complete with: &#9679 (1) 6 m³/Hr cap. vacuum pump for high-flow work table; &#9679 Jib Crane & hoist to support the edgebanding head; &#9679 Thermo-control for glue temperature; &#9679 Foot pedal control to initiate automatic cycle.

IMA NOVIMAT COMPACT/I/G80/700/L12 EDGEBANDER (W/ PRE-MILL & CORNER ROUNDING): -- Basic Specifications:Edgebanding coil stock capacity, 0.3 - 3 mm; (0.012 - 0.118"), Strips up to 12mm (0.47") can be processed. Panel thickness min/max 8 - 60 mm (0.315 - 2.362").Equipped With: -- Spraying Unit, anti sticking solvent, top and Bottom application. -- In-feed Fence with N.C. servo motor positioning. -- Pre-Milling Unit 08.378, with kW 4.5 x 2 (HP 6 x 2) vertical joining spindles, N.C. controlled, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris air jet blower. -- Edge Pre-heating Lamps, for best possible glue bond. -- Glue System: EVA Glue (Hot Melt) + 1 Quick Melt unit. -- Side Pressure Section: N.C. controlled, with (5) pressure rollers w/individual pneumatic pressure control for each roll -- Edge Magazine: Vertical coil cartridge assembly, 1 x 6 positions with auto edge-selection and HD guillotine.Workstations: -- End Trimming Unit 08.0555: High speed, double motor KW 0.66 x 2 (HP 0.88 x 2) suspended from the hold-down beam, automatic chamfer adjustment 0° - 15° for speeds up to 32 m/min (105 ft./min). -- Flush/Bevel/Radius Trimming Unit: Top & bottom, multi profile, N.C. controlled, KW 1.5 x 2 (HP 2.0 x 2) - 12,000 RPM motors, bevels 0°-30°, vertical & horizontal tracing wheels, digital read-outs. -- Corner Rounding Unit KFA 25: High Speed, (1) x Kw 0.66 (HP 0.88), 12000 RPM motor with multi-profile and N.C. servo positioning. -- Profile Edge Scraping Unit: Top & bottom, multi-profile (4) positions N.C. controlled scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing wheels, digital readouts for adjustments, chip extraction system for scraping unit. -- Glue Scraping Unit: Flat, top & bottom self-tracing glue scraper, N.C. controlled. -- Buffing Unit: Double Stage, (2) top & (2) bottom KW 0.18 x 4 (HP 0.25 x 4) - 3,000 RPM ea. motor for linear & vertical corner edge polishing. -- Glue Scraping Unit: Flat, top & bottom self-tracing glue scraper. -- Buffing Unit: Top/Bottom (2) x KW 0.18 (HP 0.25) - 3,000 RPM ea. motor.Operator Interface: -- ICOS OPEN, Large color LCD display; displays stored data, on/off work station sequence, troubleshooting diagnostic; data input by alphanumeric keyboard. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations.Complete With: -- Heavy Duty "sliding" feed chain with 80 mm wide x 60 mm long rubber pad inserts, central lubrication of transport chain, -- Variable Feed Speed 6 - 30 MPM (20 - 98 FPM); -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Frequency inverters; ball bearing guided outboard panel support up to 27-1/2", sound enclosure, all stations, all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Unit with polishing solvent prior

IMA - HKA EXPERT CONTOUR EDGEBANDER: Specifications: -- Manually operated Contour Edgebander. Designed for straight or curved (contour) edgebanding:0.5 - 3 mm Edgebanding thickness; 16 - 45 mm (0.63" - 1.77") panel & banding height; 23 - 45 mm (0.9" - 1.77") min. strip width; 100 mm (3.9") min. panel width; 250 mm (9.8") min. strip length. -- Equipped with: Versatile glue head that can be fixed to 1-side of the table to allow the operator to manually manipulate smaller pieces.During "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine, via foot-pedal control. -- Work Table:32" (800 mm) Dia. coil dispensing table, large 813 x 914 mm (32" x 36") High-Flow Phenolic worktable surface;Pre-selection counter for edgebanding material; (1) preheating unit with 600 Watts for preheating of PVC/ABS edges -- Operating Process:Floating edgebanding head is clamped to panel to be processed, precut strip of edgebanding material is fed into glue head,Operator guides head around workpiece, glue is directly applied to precut strip of edgebanding material up to end of strip. -- Features: "Floating head (hot melt) glue pot" with 0.5 Liter cap; Guillotine knife for PVC material (within floating head). -- Complete with: &#9679 (1) 6 m³/Hr cap. vacuum pump for high-flow work table; &#9679 Jib Crane & hoist to support the edgebanding head; &#9679 Thermo-control for glue temperature; &#9679 Foot pedal control to initiate automatic cycle.

IMA ADVANTAGE 500 L EDGEBANDER (w/PREMILL & CORNER ROUNDING): -- Specifications:Edgebanding capacity: Coiled material: 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped with:Pre-milling Unit: 4 kW x 2 (5.3 HP x 2) - 9,000 RPM Vertical joining spindles; SIKO digital readouts, and particle & debris air jet blower. -- Glue System - EVA (Hot Melt) with: "Quick-Lock" System. -- Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations:End Trimming Unit: Dual motor, (2) 0.66 kW (0.88 HP) motors; suspended from the hold-down beam; automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit: Top & Bottom flush trimming, W 1.0 kW x 2 (1.34 HP x 2) - 12,000 RPM Ea. motor; against the feed (up milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit: Multiuse; Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W - 12,000 RPM. -- Profile Scraper Unit: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit: Flat, Top & Bottom self-tracing Glue Scraper. -- Buffing Unit: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. -- Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge.Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all holddown beam mounted workstations.Complete with:Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station. -- Actual Model is I M A ADVANTAGE 500 L

IMPERIAL CM-006 Cartridge Modular Pulse Jet Dust/Fume Collector. Designed to be the strongest, safest, and most efficient dust and fume collector in the industry. -- Overall Specs: 4,800 CFM with 2,800 sq. ft. of total filtration media operating at 2.0:1 Air-Cloth-Ratio (ACR). Factory provided compressed air (clean - dried) is supplied to manifold mounted valves providing efficient continuous pulse jet Filter Cleaning System. -- Fan/Motor: MS-180-HD-70-20 Fan driven by 20 HP premium E motor. Efficient backward-inclined fan wheel. Manual slide gate damper on fan discharge. Fan-Silencer at fan outlet. Fan capable of 4,800 CFM at 13" SP. -- Electrical Control Panel: Nema 12 (indoor) enclosure with main breaker houses fan Start, E/stop, continuous On-Demand selector switch, Local/Remote selector. Soft Start drive to reduce power peaks on start up. -- Construction/Housing/Features: Heavy 7 - 10 gage construction with no external bolt holes guaranteeing no leaks for life. Filter access door with lockable handle, heavy duty latches for one handed operation. Tool-free filter change out with 'Even-Lock technology positive stop double sealed ensures cartridges are always installed properly. Filters are fully grounded to dust collector housing. OSHA compliant full length platform and adder access. Bolted support stricture with 54" clearance for 55 Gal drum & adapter.. Discharge via 10" Rhino heavy duty collection drum sealed cover kit requires not airlock with slide gate closure, tool-free sliding coupler, and grounding wire. -- Comes with: High Entry inlet with staggered angle inlet baffle plate provides filter protection and allows material to enter at filter level causing the natural downflow material primary separation effect. Horizontal square to round transition. DWYER DCT1000 control manages the Filter Cleaning System with user-friendly software menu. Solenoid time/on-off/settings and high/low differential pressure control capability Auto/Manual control option. Compressed air pressure regulator and filter. -- Optional: Updated control panel to include a Variable Frequency Drive (VFD) to replace the Soft Start drive and keypad on cabinet door. Upgrade Controls to Include VFD. VFD reduces inrush current at startup saving energy. Also regulates system airflow by maintaining static pressure at the collector inlet. This reduces the load on the motor saving operating cost, instead of dampening the airflow with an outlet damper that is required on other starter options. On system shut down the VFD slows the fan down to a preset speed of 20 HZ for 5 minutes (the duration of the down time cleaning cycle), this prevents dust from backflowing out of the collector due to the cleaning system pressurizing the collector creating a back flow through the ductwork. Please inquire for price.

IMPERIAL CM-002 CMaxx Dust Collector The CMAXX™ was designed with revolutionary cleaning technology that insures maximum pulse cleaning power. The CMAXX™ housing is the largest in the industry with the lowest internal velocities. This large housing causes more dust to drop into the hopper before attaching to the filters. The low internal velocity combined with DeltaMAXX™ filters makes this the most efficient dust collector in the industry.Specifications: -- 700 s/f Filter Media 2.55-1 Air to Media Ratio -- Main Handle Operator -- Overload Protection -- NEMA 4 enclosure -- Push button start -- Emergency stop button -- Run indicator lightIncludes: -- 7.5HP Fan Motor Starter with 1,790 CFM -- Integrated Dwyer DCT1000 Control -- Window kit for easy access to dust collector settings

INDUSTRIAL IWS 10 Finger Jointer:Shaper unit will handle material 2" to 8" wide, 5/8" to 2" thick and 5" minimum length and 30" maximum length.Equipped with: -- ( 2) Trim saws with 5 HP motors, (2) Scoring saws with 3 HP motors and (2) Shaper spindles with 15 HP motors - 1-13/16" dia.. -- Feed speeds from 0 to 150 FPM. Average speed of (100) lugs per minute; feed chain is equipped with lugs on 9" spacing. -- Glue applicator with improved glue spreading and simplified pump. -- Model 3502 90° brush transfer to the assembly and Flying Cut Off Saw. -- MOD - Assembly Press, 16' long, with (1) retrim saw, air over hydraulic clamp & squeezing including Complete with: -- Wertern/Nielson 800 FJ cutterhead grinder -- Set up stand -- (15) cutterhead -- Some spare parts

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 85 CFM. Max. working pressure 203 PSI. Max. inlet temperature 60° C (140° F). Refrigerant type R-134A. Equipped with: Aluminum braze plate heat exchanger. Variable speed fan. Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. Remote alarm signal terminal. High pressure switch. Fully-adjustable programmable electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.