2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Eltec 227 Processor, Equipped with a Ponsse HAHD Processor Head, Undercarriage is a D-7 Caterpillar at 70%, Engine Cummins 9.2 with 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, more pictures coming soon, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsee Ergo Harvester, 7,300 Original Hours, Refurbished H7 Processor Head, Two Sets of Tracks and Chains, Centers Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Ergo Harvester, H73 Processing Head, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight,Has Chains on Front, No Tracks, Well Maintained Machine, More Pictures coming soon, Ready for the Woods. Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponsse Ergo Harvester, H7 Processor Head, 13,000 Hours, Machine has Enclosed Cab with Heat and Air Conditioning, Good Centers Tracks on Rear, More Pictures Coming Soon Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Rottne SMV with Processor Head, RG81 Crane ,Engine Hours Reading 11.000 Hours, Rebuilt Hydraulic Pump, Enclosed Cab with Heat and Air Conditioning, Good Tires, One Set of Tracks Good Centers Operating Weight - 38,580.9 lb Length 31.5ft in Width Over Tires 9.45ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Tigercat H822D, Equipped with a Tigercat 575 Processor Head, New Engine with under 1,000 Hours, Frame Hours 9700, Enclosed Cab Heat, Air, Radio, Undercarriage 85-90%, 28" Single Grouser, Fire Suppression, Ready for the Woods. Length: 35 ft 0 in Width: 11 ft 1 in Height: 10 ft 11 in Weight: 62,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Timbco 425C Equipped with a Waratah 624 Processor head and additional 620 Head, New Final Drives, New Hyd Pump, Hyd.Oil Cooler, Both Boom Cylinders Rebuilt, New AC Pump, Enclosed Cab with Heat and AC, New Encoder, NEW Undercarriage, 8,000 Hours, Ready for the Woods . Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.