1993 Deere 548E Grapple Skidder, Winch. New Engine Hours are 7000, Frame Hours are 15,683, Tires are 80%, New Injection Pump, Newer Radiator, Newer Blade 650 Center Bearings, Ready for the Woods Operating Weight 22,801 lb Overall Length 20.77in Overall Width 9.85ft in Height To Top Of Cab 9.88ft in Ground Clearance 1.69ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 John Deere 803MH Processor with 10,000 hrs, 622B Wartah Head with a 3/4 chain on the main saw and 404 chain on the top saw. Has the updated hydraulic pumps, Air ride seat, XM radio, Touch screen monitor, The head had the pins and bushings replaced, everything is nice and tight, It comes with a oregon sharpener and extra chains and bars. Operating Weight 66,888.3 lb Height Over Cab 135.04ft in Length Of Tracks 15.13ft in Width 10.76ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Deere 859M Feller Buncher, Includes a Deere 22" Hotsaw with 40 Degree Tilt, 3,900 Original Hours, One Owner Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Operating Weight 79,510 lb Base Carrier Length 16 ft 1 in Height Over Cab 12 ft 10 in Overall Width 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1984 Deere 540B Grapple Skidder, Winch, New Rear Tires, 80% Tires in Front, New Maine Pump, Hydraulic Clutch, Flywheel Replace 4 Hours, New Imput Shaft in Rear. Complete Engine Rebuilt 20 Hours Ago, new fuel tank and new axle bearings and seals. Open Cab Centers Good. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches

1996 Deere 540E Cable Skidder with 18,500 Hours, No Heat and Ac in Cab, Center Section is Tight, Tires are 18.4 x 26 Chains around Ready for the Woods. Operating Weight 21,900 lb Overall Length 19.95 ft in Overall Width 9.16 ft in Height To Top Of Cab 9.88 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Deere 859M Feller Buncher, Equipped with a Quadco 2900 Intermittent Head, VI23 ONLY 5900 Original Hours, One Owner Operator, NEW UNDERCARRIAGE, New Saw Disc and Bearings, New Cylinder, Interior Cab with Heat and Air Conditioning Well maintained Weight 35,450 lbs Length 22 ft 0 in Width 10 ft 11 in Height 12 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 John Deere 1910 E Forwarder, Double Bunk, Engine has 19,000 Frame Hours, Strong Running Machine, Eco Tracks Front and Rear, New Transmission and New Front End Pumpkin Last Year, New Drive Line One Owner Machine, New Seat, Extra Parts Available. Ready for the Woods. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 John Deere 848H Dual Arch Grapple Skidder with winch, 7,000+ hrs. Weight 39 300 lbs Length 26 ft 6 in Width 11 ft 5 in Height 10 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Deere 648L-2 Grapple Skidder, Winch, 6,400 Original Hours, Enclosed Cab with Heat and Air Conditioning, Tires are 30.5 x 32 Good Tread, Center Section is Tight, Ready for the Woods. Weight 42,009 lbs Length 25 ft 4 in Width10 ft 8 in Height 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Deere 1170G with 12,820 hours, Includes a H413 Harvestor Head, Boom just had upgrade to IBC Wires, Upgraded Measuring Wheel, Multi Stemming saw is a super cut 100S Enclosed Cab with Heat and Air Conditioning, Set of Tracks, Clean Machine Ready for the Woods. Operating Weight: 39,242 lb Transport Height: 148.32 in Overall Width: 102 in Base Carrier Length: 285 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 KMC 2100 Skidder, Includes a 1,000 Gallon Water Tank, Detroit 653 Engine with Less than 1,000 Hours, Rebuilt Clark Powershift, Undercarriage is basically new, Transmission Rebuilt, Clark Winch, New Bushings in Tracks, Ready for the Woods. Gross Vehicle Weight: 27,250lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1978 Kockums 850 with unknown hours, international diesel (great runner), both pumps replaced in the last year, main lift cylinder, grapple cylinder, and left side steering cylinder repacked, LED lights on front and back, cab heater, double squirt boom, 4 speed Clark transmission, Volvo rear end, tracks for rear bogies cond. unknown, front tire chains cond. unknown, 24V system, pilot control joysticks (set up like excavator), electric over hydraulic control for grapple and squirt boom, put through shop last winter all oils checked and topped up. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Komatsu 430-2 Feller Buncher, Equipped with a Quadco 22" Saw Head, Enclosed Cab with Heat and Air Conditioning, Cummins 300 HP Engine with ONLY 8,200 Original Hours, New Batteries, Customer Rebuilt Saw Motor at Cost of $12,000.00, Complete Valve Bank and Celluloid Rebuilt. New PM Service all Fluids, Customer took excellent care of the maintenance on the Komatsu, Ready for the Woods. Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 komatsu 430xt-3 with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.