336-269-2284
WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.
85 Results Found
336-269-2284
$2,500
2 unused 300 HP auto-transformer coils 460 volt open style-no enclosure 2 coil design. Price is $2500 EACH or best offer.
$155,000
Complete Brewer Pallet Line consisting of: Brewer infeed cant deck; Brewer operators cab with controls; electric motor panel with starters; Brewer bar-type unscrambler and infeed belt conveyor to Brewer cut-off saw with setworks; Brewer out feed belt conveyor to gang saw; Brewer 24" wide gang with motors and sizer; Cornell stacker and West Plains notcher and conveyors to connect stacker and notcher; and waste conveyor. Removed from service and ready to load. Price: $155,000.00 loaded on your truck. NOTE: Year-end taxes or machinery investment-- Your Choice.
Saw Dust Diverter. 78" long with diverter valve and handle. 22" x 18" opening. Offered as-is/where-is, as removed from service. Call Brian 336-269-1238 for details and pricing.
Saw dust fan 66" outside diameter. 12 blades on 2/7/16" shaft. 18" x 22" discharge opening x 18" round inlet. Price includes a 50 HP motor and both sheaves. Offered as-is/where-is, as removed from service. Call Brian 336-269-1238 for details and pricing.
$17,000
BUSS 4' lumber package maker. System consists of: 4 strand infeed package deck, with reversing Tulsa drive; 4' tilt hoist with Tulsa drive; 3 decks to feed 4' stacker, with drives; 4' twist arm BUSS package maker with chain type package arms onto 3 strand outfeed package deck. System is old but in good shape. Will require removal and loading from buyer. A little oil and elbow grease will make this system worth owning. Offered as-is/where-is (Central VA) with no warranties or guaranties and subject to prior sale. Price $17,000.
$1,800
CM&E Knife Grinder for CM&E chipping head-rig using bent knives. Many knives are available with grinder.
$18,000
CORLEY 8" GANG-EDGER. Infeed rolls; split top press rolls, solid bottom feed rolls; 300 HP motor and drive, NO outfeed. $18,000 OBO.
$2,255
Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.
DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).
DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).
DODGE gear reducer: 16:1 ratio; 26 HP. Price $600.00. As-is/where-is. (Inv. # G-2).
$22,000
YORK-DONLEE 200HP propane gas boiler and associated controls. Boiler was operated only 5 years. Boiler has been drained and taken care of and removed from service along with the condensate tank. Old controls are available, but suggest purchasing new controls. See pictures for all information regarding pressure, etc. Offered as-is/where-is with no warranties or guarantees, and loaded on your truck. Price $22,000. OBO.
7 strands Unscrambler (1 without chain); 81X chain with flights on 30" centers; 7' tall x 7' deep x 15' wide; 5 HP drive. NO pocket so you can create your own.
$19,900
Complete EDMISTON mill. Mill ran in March 2024. Includes: 3 strand log deck with top/loader; chain log turner; 4 headblock mill with track / frame / cab and control panel; chipper slab belt; dead rolls; 48" Precision chipper, blow pipe, and electrical (needs work before running); All electrical panels; spare saw blades. MUST BE REMOVED BY END OF AUGUST. Price includes all components $19,900.00
$7,900
EDMISTON board edger. Includes: infeed;50 HP electric drive; starter; NO OUTFEED. Price $7,900.
$600
FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).
$850
FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).
$850
FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).
$950
FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).
$600
FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)