2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls

2017 Diamond z 4000 horizontal grinder -Approx 7,500 hours and will go up. Used daily -New discharge belt -765hp c18 -Wireless remote -Comes with 1-1/2" Screens, 3"x5" Screens, spare main hydraulic pump and misc parts

DIEHL 990 GANGRIP SAW Product No. 1001 30 HP - 3600 RPM arbor motor-AB size 4 starter-110 volt controls 12 " arbor width with 3-1/2" maximum thickness 8 roll feed - 4 top (powered) - 4 bottom Anti-kick back fingers : top and bottom One (1) saw cartridge-2 3/4 " saw blade bore New arbor bearings 5 HP feed: single speed Rip fence Outboard bearing on arbor 3" throat capacity to 1st saw blade Cleaned, painted and checked Serial # : 54174 Year: 1958

Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted

Donaldson Torit DCE- Environmental Control Booth & Dust Collector Torit ECB-4 Modules, complete with control panel Built dust booth and own lighting. Environmental Control Booth Powerful, Self-Contained Dust Collection The Donaldson Torit® DCE Environmental Control Booth, ECB Work Station, is ideal for finishing works on large and irregularly shaped parts. This self-contained working environment is specially designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The unique booth design is complete with lighting, sound- proofing and built-in dust collection. It requires no ductwork, and re-circulates the cleaned air for reduced energy costs. Workers inside the booth enjoy complete freedom of movement, cleaner air and excellent visibility. The powerful filtration capabilities of ECB Work Station prevent migration of dust to other parts of the plant, protecting workers outside the booth from the dust and noise generated inside the booth. Stand-alone unit for easy moving at the plant High filtration efficiency with Ultra-Web® cartridge filters Freedom of movement and improved visibility Flexibility to increase capacity Requires no ductwork Safely recirculates cleaned air for reduced energy costs

Dustvent Cyclone Dust Collector 3 phase 10 HP Currently under power Works good

MLS Number 11948224 Edmiston Gang Saw Edger Package Completely rebuilt Edmiston gang saw edger Can accommodate cants up to 4" tall and 8" wide Heavy duty infeed and outfeed rollers New mandrel and roller bearings installed in Fall 2022 ($14,500) Comes with extra mandrel and bearings Four sets of strobe blades with spacers Currently running on PTO power unit Includes Westinghouse 100 HP 3 PH 575V motor and starter for electric set up 12" dust blower with 20 HP 3 PH 240V motor Includes ductwork, steel pole, steel cyclone/switch valve tower Can blow into trailer or drop in dumpster Videos available

MLS Number 11955127 Filer-Stowell42 Inch Sawmill Carriage No controls 200 HP DC drive motor Control cabinet and spare parts 125 HP DC drive motor also available at extra cost.

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

MLS Number 10689968 Globe 5 Head Panel Trim Saw Approximate panel capacity: 8 feet wide X 26ft long Saw was cutting large full size sheets (8ft+ x 26ft) at a particle board manufacturer Lugs on chains have micro adjustment bolt ( brass) Air cylinders raise and drop heads Brands of chain: Woodward & White Overall width: 14 ft. 6inches Overall height: 6 ft. Overall length: 33 ft. 4 inches+-

Gruber Systems 12’ Vibration Conveyor Tables with 230V 3 Phase Vibrators Seven Available. Six with Vibrators and one without. These powerful 3-phase electric vibrator-equipped Vibe Tables offer heavy-duty performance, quieter operation, and lower compressed air volume requirements compared to pneumatic vibrator equipped tables. Specifications: Frame: Height (to top of wheelway): - 28” (71.12 cm) Width - 24” (61 cm) Length - 120” - 144” (304.8 - 365.76 cm) Wheelway (wheel center to wheel center): Width - 20-1/8” (51.12 cm) Pneumatic Vibrator (@20 psi): PSI required to Start - 25 PSI (1.75 kg/cm²) Vibrations Per Minute (VPM) - 3,200 Force - 255 lb-force (115.6 kg-force) Flow - 9 CFM (0.25 m³/minute) Electric Vibrator (220/440 volt, 3Ø, 60hz. @ 10% setting) Vibrations per Minute - 3,456 VPM Pounds of force - 230 LB Full load current - 1.26 / .69 Amps Starting current - 9.8 / 4.9 Amps

MLS Number 12543674 Hazlethorn Stake Pointer 240V single phase Air operated control Needs new cutters

HMC 3 Head Block Helle 2 or 3 Vert,Edger 16' Capacity Hyd. Over Air Set Infeed Log Deck Outfeed Deck 375HP J D Power Unit Removed From Service

2003 Hyundai 740 Wheel Loader 6000 hours One new tire Other 3 tires at 50% 4 in 1 bucket AC Former NCDOT machine Runs and operates good

MLS Number 12946454 2015 JCB 930 Forklift 1696 hours 6000 pounds capacity 12,990 chassis weight 48" forks Max fork height 336" Quad upright Diesel Pneumatic tires 85% Sideshifter 4 hydraulic functions

MLS Number 11643950 2016 John Deere 624K Wheel Loader 9689 hours Quick coupler All wheel drive Cab with AC Goodyear 17.5 x 25 tires 100% 60" rotary forks

MLS Number 11811993 2016 John Deere 624K Wheel Loader 11658 hours All wheel drive John Deere diesel engine Quick coupler 60" forks Cab with AC 17.5 -25 tires 90%

1990's Motor And Transmission New Center Repacked all cylinder No driver Door Or Glass rebuilt output shaft w/ U Joint Volvo Quick Attach Hi Vis Bucket Forks 17.5X25 75 % ?

Keystone Board Stacker 2011 Details coming soon