AIR CURE 484RF8 Pulse Jet dust Collector.. -- Overall Specs: 30,00 CFM @ 6.1:1 Air-to-cloth ratio, 158" dia. round baghouse with a capacity of (484) cloth filter bags (Bags not Included) of 8' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 4,900 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Filter cleaning: Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: AEROVENT (TWIN CITY) model 330, type CBA-SW Class 4 Backward Inclined Air Handling Blower, Arrangement 9 with 100 HP TEFC motor; Explosion doors; walk-in access door on platform at top and safety ladder. -- Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- Depending on application/desired air capacity it can be increased to about 44,000 CFM (@ 9:1 to Air-to-Cloth ration) but to do so will require slightly larger fan/motor. -- Needs new bags as they were discarded.

AIREWORKS FX15-5000 Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction, fully welded plenum built using 11 Ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 5,000 CFM, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.Includes: 2XTB Tipping Bin with (2) inlets. -- Forklift truck moveable with Locking wheels and railings instead of plastic collection bagsPHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX-05-2000 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options.Features: -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 2,000 CFM / 7-10 IWG with 16.7:1 air to cloth ratio. Equipped with: -- (5) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 125 Sq. Ft. of cloth filter area and 16.7:1 air to cloth ratio with 40 Gal. of collection capacity. Complete with: -- Direct drive dynamically balanced centrifugal fan assembly with 5 HP TEFC motor, 1,750 RPM, non-sparking Heavy Duty machined & balanced impeller; 11" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX-10-3500 Modular Dust Collection System. The "FX" Series is a self-contained modular designed unit for interior use that utilizes a dynamically balanced fan.Features: -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 3,500 CFM / 7-10 IWG with 14:1 air to cloth ratio. Equipped with: -- (10) 12" x 8' High-Efficiency filter bags up and (2) plastic collection bag down. -- The filter bags have 250 Sq. Ft. of cloth filter area and 13:1 air-to-cloth ratio with 80 Gal. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, 1.750 RPM -- Non-sparking Heavy Duty machined & balanced impeller; 13" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS - FX-15-5000: Modular Dust Collector"MOD-FLEX" Technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizes a dynamically balanced fan, TEFC motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with: 16:1 Air-to-cloth ratio. -- Equipped with: (12) 12" x 8' High-Efficiency filter bags; up with 301 sq/ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with: 15 HP TEFC Motor; Heavy-Duty machined & balanced, nonsparking impeller; 15" dia. ductwork inlet. -- Waste collection bin with pneumatic cylinder lift by air switch -- Unit comes with manual motor starter; factory installed wiring from the motor to the starter. -- Sound Level: Less than 80 dB.

AIREWORKS FX-15-5000 Modular Dust Collector. The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizies a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with 16:1 air to cloth ratio. -- Equipped with: (12) 12" x 8' High Efficiency filter bags up with 301 Sq. Ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with 15 HP TEFC motor; Heavy Duty machined & balanced, non-sparking impeller; 15" dia. ductwork inlet, starter. -- Sound Level less than 80 db.

ALJON - IMPACT V, Used Car CrusherElectric but includes generator and trailer, Includes RemoteOnly 1,470 HoursSpecifications: -- 40-Gallon Diesel Tank. -- Loading Area: 84" W x 240" L. -- Overall Dimensions: 43' L x 8' W x 13-1/2' H. -- 8" Bore cylinder, 5" dia. shaft. -- 81" Stroke cylinder. -- 301,600 Lbs Total combined Cylinder Force. -- 3,250 PSI.

ALJON - 400XL, ...Logger/BalerSpecifications: --Scrap Metal (average): 6 - 10+ Metric tons/Hr. -- Approx. (14,500) hours.Dimensions: --Height: 13 Ft. - 6 in. (4,115 mm). --Width: 8 Ft. (2,438 mm). --Length: 39 Ft. (11,887 mm). --Weight: 61,850 Lbs (28,055 kG). --Tires: 11:00 x 22.5 Tubeless Radial Tire. --Loading Area: 8 Ft. (2,438 mm) x 12 ft. 4 in. (3,759 mm). --Log Size: 20 In. (508 mm) high x 32 in. (813 mm) wide x variable length. --Density: 25 - 60 Lbs/cu. ft (400 - 961 kG/cbm).Material Handler --23 Ft. (7,010 mm) Boom Reach. --The "400XL" Baler’s curved box design and larger loading chamber efficiently process: Bulky loose scrap, white goods, and gauge material down to manageable 20 in. (508 mm) x 32 in. (813 mm) x variable bundles; 20 in. (508 mm) minimum. The operator controls the 3-way compression process from the cab.Final compression is fully automatic. Increased hydraulic power allows the operator to sort & stack material during the automatic baling cycle, eliminating lost labor time and minimizing the labor cost per ton. -- NOTE: The main piston needs work (leaking), and (1) piston that closes the box needs to be rebuilt.See the attached literature for detailed technical specifications.

ALLEGHENY 20-350C DOCUMENT SHREDDERSpecifications: -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 Lbs

ALLEGHENY - 16-250C, ...Paper Shredder With Baler Cutting Assembly: 16" Horsepower Options: 5 Hp., 7.5 Hp., 10 Hp. Voltage: 208V, 230V, or 460V, 3 phase, 60 cycle Input Speed: 64, 49, 66 FPM Cutter Type: 4 ¼" diameter, Sawtooth Cutter Size: 5/16", ½" (other shred widths available) Dimensions: 37" W x 58" L x 44" H (70"L w/bagholder) Weight (approx.): 1,300 lbsHorizontal baler w/incline conveyor, 2007. Air filtration system included

ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

AMERISHRED MODEL PT-1010, ...Dual Shaft Shredder Specifications: -- Model: PT-1010 --(2) 10HP Motors --High Torque / Low Speed --(2) Shafts --5/8" Hook Cutters --23" x 20" Feed Opening --Conveyor: 17.5'L x 24"W with 2' Feed Hopper

AMERICAN BALER - 8043H-10150F: Wide-Mouth Horizontal Auto-Tie Baler including a 30° Infeed ConveyorSpecifications: &#9679 Cylinder: 10".&#9679 Motor: 150 HP (Twin 75 HP).Equipped with:&#9679 Wire-tie system.&#9679 30° Drag link incline conveyor: 6 Ft. wide x 13" deep.NOTE: Some electrical wiring has been cut, but the machine is all intact.

AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

AMERICAN BALER - PAC 4029-8T30, ...Auto-Tie BalerSpecifications: -- Motors: Twin 30 HP (2). -- Main cylinder: 8". -- Feed opening: 40"; x 29";. -- Charge box: 29"; x 42"; x 49";. -- Normal operating pressure: 2,500 PSI. -- Charge box volume: 34-1/2 Cu/Ft. -- Compressing force: 125,664 Lbs. -- Bale size: 30"; x 43"; x Variable.Features: -- Automatic wire tier. -- Single tension cylinder.

AMERICAN BALER - PAC-4029-730R, ...Auto-Tie Baler(2) Available !Specifications: -- Motor: 30 HP. -- Main cylinder: 7". -- Feed opening: 40" L x 27-1/2" W. -- Charge box: 29"; x 42"; x 49";. -- Bale size: 30" x 43" Variable. -- Normal operating pressure: 3,000 PSI. -- Compressing force: 115,453 Lbs.Features: -- PARKER PLC controls. -- Regen hydraulics.

AMERICAN BALER - DC-6343-830M, ...Horizontal Auto-Tie BalerSPECIFICATIONS: -- Bale Size: 44" x 43" x Variable Length -- Motor: 30 HP -- Cylinder: 8" -- Feed Opening: 63" x 41-1/2" -- Loaded on your Truck

AMERICAN BALER - 8043H10150F, ...Wide Mouth Horizontal Auto-Tie BalerSpecifications: -- Cylinder: 10" -- Motor: 150 HP (Twin; ea. 75 HP) -- Combo-belt Conveyor: 72"Equipped with: -- Shear blade -- Wire Tie System

AMERICAN BALER 8043-10-120 Auto-Tie Horizontal BalerSpecifications: -- Main cylinder: 10″. -- Bale size: 43″ x 43″ x variable. -- Feed opening: 80″ x 41-1/2". -- Power unit: (2) 60 HP Motors. -- Total ram thrust: 235,620 Lbs. -- Pressure settings: 3,000 PSI. -- No load cycle time: 9-1/2 Sec approx. -- Oil Capacity: 400 Gal