Vance PT600R8 Drum Chipper See this machine at IWF Atlanta 2024! This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.

Vecoplan RG 42/60 XL 60 HP Motor 15" Rotor 42" x 52" Hopper Opening 1" Screen This machine went through a rebuild. It was not big enough for the buyers application. Available immediately.

Vecoplan RG52-60 U Stretch Slow Speed Grinder 60 HP Motor No Control Panel

Brand new never used!! 16’8” long 22” wide 19” height (adjustable)

Vecoplan Model 45/12/2VU HZF Grinder 75 HP Motor 18" Wide opening No Vibrating Infeed conveyor

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

VIET Planer Sander Sander model S2 321 HR/KRT ( 2018 ) !st head planer with helical insert cutter knives 30 HP 460 volts 2nd head drum contact roller 3rd head combination drum rollers with finish platen Both sanding heads run by 30 HP motor 460 volts Adjustable rubber coated pressure rollers Opening capacity range 1/8” to 6” Sanding belt size 44” x 103” Feed speed 19 to 52 FPM Electronic digital readout with auto thickness positioning Disc brakes on each machining station Front and rear emergency push buttons Electro pneumatic sanding belt tracking This machine has low hours as owner only ran half days first year and less after next years

Visionary Trim Saw

2016 Casadei Flexa 47 Edgebander 230 V/3 PH

Casadei R32 MK Pin Router

There are (12) of these available. (2) are new in crates. (10) are being used. Available approx August 1 2023 Manufacturer specs: PRODUCT DESCRIPTION AT-Race 4' x 12' Face Frame Assembly Table The AT Race 4' x 12' Open-Back Face Frame Assembly Table features clamping arms that glide smoothly on an open beam. This allows assembly of larger face frames or other components with parts that extend beyond the top of the table. The redesigned quick-clamps feature place-and-stay movement – no need to lock them into place – and centered activation for easy clamping from either direction. The rigid steel arms, constructed out of Unistrut, will stand up to years of use, while the open back table gives you more work area and can handle oversize frames without taking up valuable shop space. Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. This assembly table is an essential addition to your inventory of professional woodworking production tools. When you are in need of premier woodworking tools and supplies, turn to Castle USA. We pride ourselves on providing our customers with the absolute best and highest quality tools, machinery, and accessories. Features and Benefits include: - Professional woodworking assembly table - Open back design: - Accepts oversized frames and other large assemblies - Maximizes work area - Dual Unistrut clamping arms with three adjustable air cylinders that hold work firmly for easy assembly and minimal sanding - 45 Degree, 1" laminated top for easy glue clean-up and less operator fatigue than horizontal clamping tables - Built-in driver holster keeps driver within easy reach for increased convenience and efficiency (driver sold separately) - Convenient integrated connection port for air-powered driver adjacent to driver holster - Left- and right-side fences allow two-person operation - Rigid and lightweight for easier handling and positioning Technical Specifications: - Unistrut rigid steel arms with redesigned quick-clamps - Driver sold separately - Assembly required - Footprint: 165"x43"x83" - Manufactured in the USA

MANUFACTURER SPECS: 2000 C.B. LEVIGATRICI 52" DUAL HEAD WIDE BELT SANDER. 1ST HEAD: 12" SPIRAL RUBBER ADJUSTABLE HEIGHT CONTACT DRUM. SECOND HEAD: DIGITAL PLATEN. VARIABLE SPEED EVERYTHING. LONG BELT LENGTH OF 103". OSCILLATING BELT BLOWERS. VARIABLE SPEED EVERYTHING. DIGITAL POSITIONING. 220 volt 3 phase. includes 18 spare belts…approximately half new, rest lightly used.

Cefla Roctre/D Reciprocating 2 Head Spray Machine 1600 mm wide spray area.

Cefla Roctre/D Reciprocating 2 Head Spray Machine 1600 mm wide spray area.

Cefla Rotostain 2000

Cefla Sorbini T/20-3-STP Triple Head Print & UV Line (3) Print Head System (2) IR Ovens Available Immediately

(14) spindles with 1-1/2 hp motors on each. On/off switch for each motor. chucks adjust to grip up to 1/2” bit stroke adjustable from 4” to 10” 121” x 39-1/2” table with (4) hold downs Adjustable speed hydraulic feed 230 volt 3 phase

- Width capacity 53”. Drum, Drum, Combination Head (see sander specs - Head 1: Rubber covered contact roll, 10” dia, 65 shore adjustable with dial - Head 2: Rubber covered contact roll, 10” dia, 65 shore adjustable w/dial - Head 3: Combination head, (2) 5-1/2” finishing drums w/platen - 440 V, 60 cy, 3 Phase - Year 2000, Good Condition - Warehoused after plant shut down factory in 2013 - Have manuals /spec sheets - Machine weighs app 6000#’s. - Buyer must pay for riggers to load onto truck. (our forklifts can’t pick it up)

CEMCO 3 Head Industrial Sander. Running when removed from location.

This grinder was removed from service in good working condition. It is ready to load/currently in storage 200 HP Main Motor Cutters 117 F-Cutters Screen (4 ) 22" Diameter Wide with 1-1/2" Holes The width is 51” and the height is 17” (infeed opening)