(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door

JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.

JWC ENVIRONMENTAL Muffin Monster 3-Shred-H-800 Shredder/GrinderSpecifications: -- Model #: 3-Shred-H-800 - Stainless Steel -- Used only two times -- Stainless steel construction -- Alloy steel drive shafts and scrapers -- Cartridge-style tungsten carbide mechanical seals -- Mill opening:Length: 7 inches Width: 9 inches -- 5 HP motor -- Electrical:230 V 60 Hz Phase 3

KAESER KCF 200 Oil/Water Separator Specifications: Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. Filling volume 19.2 Gallons. Max. operating pressure 232 PSIG. Equipped with: 30.5 Gallon Container. 4.9 Gallon Pre-filter, 5.4 Gallon Main filter. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).

KAESER KCF 200 Oil/Water SeparatorSpecifications: -- Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. -- Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. -- Filling volume 19.2 Gallons. -- Max. operating pressure 232 PSIG.Equipped with: -- 30.5 Gallon Container. -- 4.9 Gallon Pre-filter, 5.4 Gallon Main filter.

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor w/Integrated Dryer & TankSpecifications: -- Rated cap. 191 CFM; max. pressure 125 PSIG; 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end; 1:1 motor-air end coupling; wye-delta reduced voltage magnetic starter; electronic Thermo-Management (ETM) system. -- Equipped with: -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element; safety pressure relief valve; anti-vibration mounts; sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad; KAESER ABT 60 Integrated Refrigerated Dryer. -- Includes: -- Vertical Accumulator Tank (approx. 400 gal.); KAESER KCF 100 Oil/Water Separator..

KAESER ASD 40 T 40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24) Specifications: Rated cap. 191 CFM. Max. pressure 125 PSIG. Equipped with: 40 HP - 3,570 RPM TEFC Direct drive motor, IE3 (Premium Efficiency). "SIGMA PROFILE" Air end. 1:1 Motor-air end coupling. Wye-Delta reduced voltage magnetic starter. Electronic Thermo-Management (ETM) system. 2-Stage 4 micron air intake filter, with Cyclone pre-separation & replaceable element. Safety pressure relief valve. Anti-vibration mounts. Sound enclosure. KAESER "SIGMA CONTROL 2" PC-Based controller, with LCD Display & Touchpad. Complete with: Integrated Refrigerated Dryer. Compressor Operator Manual & Controller User Manual. Dimensions for this Specific Machine: 70" x 36" x 61" H. Weight for this Specific Machine: 750 kG (1,650 Lbs). CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

KVAL COMMANDER Pre-Hung Door Machine/Door Line. Automated Cylindrical Lock and Hinge Machine for Pre-Hanging Interior & Exterior Doors; for doors Up to 2-1/4" thick x 4' x 9'; Routes, makes a 3° bevel on one side of the door edge. -- Traveling hinge router stops at each collar on the index shaft and tilts into approx. 3-1/2" to 5-1/2" hinge pocket on square or bevel doors. -- Selector switch allows sequencing for (2 - 3 or 4) hinges, 1/4" or 5/8" corner radius, and door/jamb or door only machining. Turret stops determine hinge size. -- Hinge index bar with embedded scale can be interchanged with other pre-set index shafts for rapid hinge center adjustments, or collars can be adjusted along the scale. -- Heavy Duty lock section features 5 HP face bore, 3 HP latch bore and 1.5 HP plate router; adjustable for 2-1/4" - 5" back-sets with self-centering clamp system for faceplate & latch hole; plate router adjusts for square or beveled face plates up to 12" long. -- Jamb clamps front load for easy handling self-adjust; there is no jamb width limitation. -- This machine can produce 250 or more doors per shift, including lock prep and hinge mounting to the door and hinge jamb.

KAY INDUSTRIES Phasemaster MA-1 5 HP Rotary Phase Converter.Features: 5 HP Largest single motor starting capacity; will run 10 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-1 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-1-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 522Optional LSV option for sensitive electronics add...$ 550

KAY INDUSTRIES Phasemaster MA-2, 10 HP Rotary Phase Converter.Features: 10 HP Largest single motor starting capacity; will run 20 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-2 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-2-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 500Optional LSV option for sensitive electronics add...$ 900

KAY INDUSTRIES Phasemaster MA-6, 30 HP Rotary Phase Converter.Features: 30 HP Largest single motor starting capacity; will run 60 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-6 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-6-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 7006Optional LSV option for sensitive electronics add...$ 1,200

MAKOR Q-ONE 1300 FEED THRU FLAT LINE SPRAY SYSTEM: -- Features:The Q-ONE sprayer is a single-arm Reciprocating System with paper belt overspray collection; it combines productivity, flexibility, and quick change-over with a limited investment. This continuous belt conveyor system, combined with disposable paper promotes a "self-cleaning" machine & dramatically reduces clean-up & service time.Operation: -- Suitable for all types of conventional coatings from solvent to water-based materials; -- Conveyor advances only when parts are present. -- Conveyor system with a vacuum belt to secure & support the feeding of the disposable paper, ensuring proper tracking & automatic winding of the paper roll. -- The paper roll change-over time is only a few minutes. The panel lies flat on the belt which prevents the transfer of over-spray onto the bottom side. -- The spraying enclosure is pressurized via (2) intake fans and filtered by means of dry filters. -- This system allows clean air & maintains consistent airflow throughout the Spray Cabin, also limiting the machine maintenance time to a minimum and produces an enhanced quality finish, control & containment of over-spray, resulting in significant material economy. Internal airflow is adjustable by means of inverters. -- The spray system uses an inverter drive, variable speed reciprocating trolley which provides a consistent spray speed & pattern across the entire conveyor belt.Equipped With: -- Spray system for (4) spray guns (guns NOT included), mounted on a "Quick-Change" gun support trolley. -- (2) Gun holding plates with "QC" (quick-change) system to allow for fast gun replacement -- (3) High-pressure Coating Circuits with recycling through a fluid distribution manifold + (1) High Pressure Circut (without return) for Solvent. -- Recycling Coating Circuts have return hoses for quick washing the Circut & recirculating of the Coatings. -- PLC touch-screen for clear visual operator interface & large memory storage of working programs, parameters, controls & diagnostic functions. Photodiode light bar reads the location and size of the part to be sprayed. Technical Specifications: -- Working Length: infinite -- Working Width: 25 - 1,300 mm (1" - 51") -- Working Height: 3 - 60 mm (0.125" - 2.375") -- Feed Motor: 0.75 kW, variable speed control from 1 - 6 MPM (3.3 - 19.6 FPM) -- Vacuum Belt Motor: 1.5 kW (2 HP) -- Paper Rewind Motor: 0.18 kW 0.24 HP). -- Paper Roll: Dia. 550 mm (21.6") max. -- Reciprocator Motor: 2.2 kW -- Exhaust Fan Motor: 5.5 kW -- Air Flow: 7,950 CFM -- Pressurization Air: 2 x 3,900 CFM -- Total Installed Power: 13 kWNOTE: Pumps & Spray Guns are NOT included with this system.

MAKOR Q-ONE Feed Through Spray Machine. -- The Q-ONE sprayer is a single arm Reciprocating System with a paper belt overspray collection; it combines productivity, flexibility, and quick change-over with a limited investment. -- This continuous belt conveyor system, combined with disposable paper promotes a "self-cleaning" machine & dramatically reduces clean-up & service time.Operation: -- Suitable for all types of conventional coatings from solvent to water-based materials; -- Conveyor advances only when parts are present. -- Conveyor system with a vacuum belt to secure & support the feeding of the disposable paper, ensuring proper tracking & automatic winding of the paper roll. -- The paper roll change-over time is only a few minutes. The panel lies flat on the belt which prevents the transfer of over-spray onto the bottom side. -- Spraying enclosure is pressurized via (2) intake fans and filtered by means of dry filters. -- This system allows clean air & maintains a consistent airflow throughout the Spray Cabin, also limiting the machine maintenance time to a minimum and producing an enhanced quality finish, control & containment of over-spray, resulting in significant material economy. Internal airflow is adjustable utilizing inverters. -- Spray system uses an inverter drive and variable speed reciprocating trolley which provides a consistent spray speed & pattern across the entire conveyor belt. Equipped With: -- Spray system with (4) spray guns, mounted on a "Quick-Change" gun support trolley. -- (2) High-pressure lacquer feeding circuits with recycle through a fluid distribution manifold (pre-disposed for (2) additional laquer feeding circuits). -- PLC touch-screen for clear visual operator interface & large memory storage of working programs, parameters, controls & diagnostic functions. Photo diode light bar reads the location and size of part to be sprayed.Technical Specifications: -- Working Width: 0 - 1,300 mm (0" - 51"). -- Feed Motor: 0.75 kW, variable speed control from 2.5 - to 5 MPM (8 - 16 FPM). -- Vacuum Belt Motor: 1.5 kW(2 HP). -- Paper Rewind Motor: 0.18 kW. -- Paper Roll: Dia. 21.5" max. (approx. 9,500 lineal ft.). -- Reciprocator Motor: 2.2 kW. -- Exhaust Fan Motor: 5.5 kW. -- Air Flow: 7,950 CFM. -- Pressurization Air: 2 x 3,900 CFM. -- Total Installed Power: 13 kW.NOTE: Really still like new with Very Low hours !! It's probably still the original roll of paper on the machine.

MAKOR Q1 Spray Line including Paint Pumps and Guns:This line was set up with the idea of adding a stack oven after the sprayer in the future if it is required. This line has seen very little use.Station #1: Infeed loading conveyorStation #2: MAKOR Q1 paper belt sprayer 3 circuits plus a cleaning circuit.Station #3: Ppowered roller conveyorsStation #4 (3) three lamp UV oven. Station #5: Outfeed conveyor. The line comes with (2) two paint pumps and (4) four spray guns, the brands GRACO MERKUR and GRACO spray guns. Reciprocating Spray Machine, Makor Q-ONE 1300 with Changeover SystemFlexibility, reliability, and ease of use, combined with limited managing cost and investment, make Q-ONE the ideal machine for companies with low-volume production applying water-based or solvent-based paints, or glues. Even companies switching to automatic coating applications for the first time can realize the advantages of the Q-ONE: Higher production and paint savings, uniform coating, and higher and more consistent quality.Structure and Transport System:The single steel frame guarantees perfect stability and the absence of vibration during the oscillating spraying. A part reading bar is located at the entrance of the machine to detect the workpiece shape to optimize paint consumption. The workpiece transport system consists of a paper belt or plastic film supported by a vacuum belt system makes the machine self-cleaning, eliminating downtime and maintenance costs, but does not allow the recovery of the sprayed productoverspray is prevented from accumulating on the lower side of the workpiece paper roll replacement is quick and easy.Spraying Group:The guns, mounted to oscillating supports, are adjustable to allow optimal orientation of the spraying zone the entire oscillating group is connected to the frame of the machine through pads that guarantee the absolute absence of vibrations, resulting in perfect paint quality on the workpieces, the pressurization of the zone containing the oscillating mechanisms extends its life and requires little maintenance.Four (4) guns can be connected to one of the three (3) coating circuits three (3) high-pressure circuits with recycle for coatings one (1) high-pressure circuit (without return) for solvent. Coating circuits have return hoses for quickly washing the circuit and for the recirculation of paint-standard supply provides two (2) gun holding plates with a quick disconnection system to allow for fast replacement of the spraying unit.Paper Unrolling and Rewinding System:The unrolling system at the entrance and the rewinding device at the exit are designed to maintain constant tension of the paper, avoiding breakage even when it is soaked by the paint, loading and unloading the support rolls are easy due to lateral pull out on wheeled carriers. An independent vacuum hold-down fan enables superior control of the paper belt rewind station and includes a self-adjusting system to maintain a consistently flat paper belt transport

MAKOR LTSI/6 Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.Dimensions are 20’ L x 5’ W, 8’ H, and weighs approximately 7,000 lbs.

MAKOR LTS/6E Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.

ROTOFAST 10 panel cleaner is designed for automatic cleaning of parts just prior to coating application for a dust-free finish. A rotating brush is combined with air blow-off units and an anti-static bar in order to efficiently clean flat or profiled parts of different shapes and dimensions. KEY FEATURES --Top surface One rotating brush with variable speed and height adjustment --One de-ionizing (anti-static) bar --One group of rotary blowers with timed entry --One group of fixed blower nozzles with timed entry Bottom surface --One group of fixed blower nozzles with timed entry --All components housed in single cabinet with suction hoods --Feed speed adjustable by potentiometer --Rubber pressure rollers to secure parts while brushing --Belt conveyorWeight 600 Kg.

MARATHON - V-6030HD: Vertical Baler -- Vertical Baler 60". -- Motor: 10 HP. -- Cylinder: 6". -- Bale size: 60" x 30". -- Loaded onto your truck.

MARATHON - RJ-225: Stationary Compactor - 2-YardSpecifications -- 10 HP. -- Working condition. -- Rusted at anchor point.