MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area: "X" Axis 126" (3,200 mm); "Y" axis 51" (1,300 mm); "Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axis are 192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with: (14) Vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool rack mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible); 512 KB user RAM,14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

MORBIDELLI AUTHOR M400 FR FLAT TABLE MACHINE(W/LOADING/RAKE/OFFLOADING): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing with "Rake" and "Automatic Off-Loading Conveyor".Loading/working/processing direction is from LH (facing to RH (facing). -- Work Area:"X" Axis 143.7" (3,650 mm), "Y" axis 62.9" (1,600 mm), "Z" axis stroke 11" (280 mm), max material thickness is 6.69" (170 mm). -- Positioning Speeds:"X" & "Y" Axis 279 FPM (85 MPM), "Z" axis 98 FPM (30 MPM).Closed loop AC servo drive system with Precision Rack/Pinion in "X" axis & recirculating ground ball screw in the "Y" & "Z" axis.All axes ride on precision prism linear guideways. -- Work Table:5' x 12' Aluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(9) Independent, NC controlled working zone areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit "F37L2":3 HP (2.2 kW) - variable speed up to 7,000 RPM motor; F37L2 Boring Block with (24) Vertical spindles with (10) independent vertical spindles in "X" axis & (14) spindles in "Y" axis.The 10-spindle "X" axis boring unit is NC controlled with a 11.5" (293 mm) "Y" adjustable spread from its home position & independently controlled according to the drilling pattern being performed, this feature is IDEAL for high-speed line hole drilling.(12) Horizontal spindles with (4+4) in "X" axis on the programmable Independently NC controlled 10-spindle vertical boring unit, & (2+2) on the 14-spindle boring unit in "Y" axis. (1) NC controlled 0° - 90° "X" / "Y" Grooving Saw for max. 120 mm dia. blade. -- Machining:(1) 16.5 HP (12 kW) "Power 2000" Electro spindle w/lifetime lubrication and HSK F63 adaptor, NC controlled spindle speeds from 900 - 18,000 RPM.(1) 16-position "Rapid-16 traveling ATC tool plate for "on the fly" ATC NC Touch-off Probe for automatic Tool Length setting. -- Operator & Machine Control,PC Front End with XILOG PLUS + Windows "7" operating system. 17" high resolution LCD flat screen; ergonomic keypad.USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. -- "XILOG Plus" offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization; onboard calculator; mirror-imaging and repeat imaging; all electronics mounted in an air conditioned, dust-free environment control cabinet. -- Complete with:(3) 300 m³/Hr "BECKER" Vacuum pumps;

MORBIDELLI N 100 15 FLAT TABLE MACHINE (W/ATC/BORING/RAKE): -- Specifications: 5' x 12' x 37" H High-efficiency laminate aluminum with Magnetic vacuum locking system.Grid pattern allows use of vacuum pods or closed cell rope gasket material & use of spoil boards for nested base machining, Part location pop-up pins mounted on table perimeter, Chips conveying device. -- Working Area: X-Axis 3,686 mm (145.12"), Y-Axis 1,555 mm (61.22"), Z- Axis 150 mm (5.91"). -- Travels:X-Axis 4,230 mm (166.54), Y-Axis 1,985 mm (78.15"), Z-Axis 250 mm (9.84"). -- Positioning Speeds: X- & Y- Axes 35 MPM (114 FPM), Moving Gantry, High precision rack & pinion system for X & Y Axes, Ground ball screws for Z-Axis, All axes ride on extra-large precision profile linear guide ways. -- Boring Unit: 2.2 kW (3 HP) Motor, (12) Independent vertical roto-axial spindles with (8) in X-Axis & (4) in Y-Axis, Maximum spindle speed 8,000 RPM. -- Machining: (1) 15 kW (21 HP) Air-cooled electro spindle with HSK F63 Adaptor, Variable spindle speeds to 24,000 RPM, (1) 14-Position TR side tool changer. -- Operator Interface:Mobile console with Integrated PC “EYE-M"; Industrial PC with 21-1/2" Full HD Multi-touch color touchscreen, WINDOWS Operating system, "MAESTRO SUITE" with Auto-diagnostic to Zooming, Controlled acceleration & deceleration, Encoder feedback, Dynamic tool correction via PLC due to active tool wear using space-and-time criteria, "TECPAD" Remote pendant with 7" Color touchscreen. -- Complete with: PRO-SPACE safety system which allows worktable access to all sides of the machine, (1) 300 m³/Hr. Vacuum pump, Automatic lube system, -- NOTE: Machine was de-installed by a technician and is currently in storage.

MORBIDELLI AUTHOR 503 FT CUSTOM CNC MACHINING CENTER (W/ATC): -- Specifications:4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;Working cap. "X" axis is 125.2" (3,180 mm), "Y" axis is 41.3" (1,050 mm) for routing "Z" axis stroke is 5.7" (144 mm); max. material thickness is 3.1" (80 mm) -- Positioning speed:"X " & "Y" axis is 213 FPM. (65 MPM), "Z" axis is 82 FPM (25 MPM). -- Work Table: 4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;(2) pneumatic side stops, (2) working areas -- Machining Units:(1) 10 HP (7.5 kW) Vertically mounted electro-spindle router with ISO-30 adapter, LH & RH rotation, inverter driven from 12,000 - 18,000 RPM,(1) 5-position ATC tool rack mounted on the LH side for automatic tool change, -- Operator & Machine Control:Separate control cabinet with Morbidelli "TRIA 7500" CNC Multi-processor, VGA monitor, ergonomic keypad, 3-1/2" disk drive, and (2) serial ports RS-232 & RS-242.Offers incredible list of functions from (a) auto-diagnostic to (z) zooming; -- Complete with: Voltage stabilizer 208. 230, 460 V, 60 Hz, 3 Phase Auto Transformer (1) 100 m³/Hr vacuum pump. -- Actual model is MORBIDELLI AUTHOR 503 FT CUSTOM

MORBIDELLI AUTHOR 636 FLAT TABLE MACHINE (W/ATC/RAKE): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis 144" (3,660 mm); "Y" axis 57.8" (1,470 mm) for routing & 48" (1,230 mm) for boring; "Z" axis stroke 11" (280 mm); max. material thickness is 7" (180 mm). -- Positioning Speeds:"X" & "Y" Axes 262 FPM (80 MPM); "Z" axis 74 FPM (22.5 MPM).Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axis; all axes ride on precision prism linear guideways. -- Worktable:Aluminum grid "MATRIX" vacuum table machined with: Square grid pattern for fixturing parts;, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(2) Independent working areas; external pop-up reference ins located on the sides & back of the table for positioning parts. -- Boring Unit:3 HP (2.2 kW) - dual speed 4,500 & 6,000 RPM motor; (12) vertical spindles with: (7) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining:(1) 15 HP (11 kW) "Power 2000" Electro-spindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM.(1) 12-position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator & Machine Control:PC Front End with: NUM 1040 + Xilog III + Windows Operating System.Includes: 12" High resolution CRT, ergonomic keypad, 1.44 MB & CD ROM disk drives, (2) serial ports RS-232 & RS-242. All housed in air-conditioned cabinet with a KELVIN air conditioner. -- Complete with:(2) 250 cbm BECKER "VTLF 250" Vacuum pump with: Emergency stop rope, handheld pendant control. -- Options Include:Nesting Rake: Off feed table to increase machine/operator output; (1) 208/230/460 Volt transformer. -- Actual model - MORBIDELLI AUTHOR 636 S.

MORBIDELLI UNIFLEX HP 1.1 CNC MACHINING CENTER (2-HEAD): -- Specifications:Flexible "TOP & BOTTOM" Machining Center that uses an innovative panel handling system. -- Positioning SpeedsThe "UNIFLEX" can reach positioning speeds of: 130 MPM in "X" Axis; 80 MPM in "Y" axis; 50 MPM in "Z" axis with total safety, providing an unmatched working capacity. -- Working DimensionsMax. worktable part size for: "X" axis is 118" (3,000 mm); "Y" axis is 51" (1,300 mm) "Z" axis max. part thickness 3.1" (80 mm).Min. worktable part size for: "X" Axis is 7.8" (200 mm); "Y" axis 2.7" (70 mm); min. part thickness 0.157" (4 mm). -- Worktable:Automatic LH infeed air table with gripper clamps; automatic RH outfeed transfer conveyor with belts; both infeed & outfeed are considered Robot ready. -- Boring Units:(1) Top mounted boring block: 4.2 HP (3 kW); variable speed from 1,500 - 6,000 RPM; (48) vertical spindles: 24-Spindles in "X axis & 24-spindles in "Y" axis; (6) horizontal spindles with: (2+2) in "X" axis & (1+1) in "Y" axis; (1) 4.2 HP (3 kW) - 9,000 RPM, NC controlled 0°-90° "X/Y" Grooving Saw, max. 120 mm dia. blade.(1) Bottom mounted boring block: 4.2 HP (3 kW); variable speed from 1,500 - 6,000 RPM; (48) vertical spindles: 24-Spindles in "X axis & 24-spindles in "Y" axis; (6) horizontal spindles with: (2 + 2) in "X" axis & (1 + 1) in "Y" axis; (1) 4.2 HP (3 kW) - 9,000 RPM, NC controlled 0°-90° "X/Y" Grooving Saw, max. 120 mm dia. blade. -- Machining:(1) Top mounted 10 HP (7.5 kW) electro-spindle with: HSK D-50 Adaptor; "ERC 32" tool holders & RC-32 collets, 1,500 - 24,000 RPM.(1) Bottom mounted 10 HP (7.5 kW) electro-spindle HSK D-50 adaptors, "ERC 32" tool holders & RC-32 collets; 1,500 - 24,000 RPM. -- Operator Interface:PC Front-End with: "XYLOG PLUS" + Windows environment Operating system; 20 GB hard drive; 17" TFT monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) 1.44 MB floppy drive; (1) CD ROM drive; all mounted in separate control console. -- Operating System:"XYLOG PLUS" Offers Real time multitask processing; programs can be transferred via diskette or downloaded by wire. -- Complete with: Pneumatic part clamping devices; sound enclosure; safety mats. -- Operating features: Machine can work the panel from above & below at the same time and can produce (2) identical or mirrored panels per cycle with no difficulty.The "UNIFLEX" can machine porous materials since the pieces are held with grippers, directly managed by the numerical control; it can even process small pieces and carry out "through" machining.(4) Operating modes at each cycle, it can change automatically from: Top machining to bottom machining, to top & bottom machining together, either on (1 or 2) stacked panels. -- Actual model is MORBIDELLI UNIFLEX HP.

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

MOSLEY HARRIS Series AP 16/13 2-Ram Horizontal BalerSpecifications: -- Main cylinder: 16" -- Eject cylinder: 13" -- Main motors: (2) 100 HP -- Feed opening: 86" x 20"Equipped with: -- Liner Plates are roughly appx. 50% and evenly worn floor. -- Strapper is a 330 Model, but still works very well. -- Baler has been used primarily for OCC and ONP.

MSI - AT-643: Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: -- 60" x 43" Feed opening. -- Bale size: Variable x 43" x 30". -- Bale weight: 900 - 1,700 Pounds; OCC" 5 TPH. -- Cylinder: 7"; repacked. -- Motor: 40 HP. -- New hydraulic pumps; new "T-1" Liners on floor & platen. -- 60" Wide x 25 feet long slider bed; conveyor included.

MTA DE 0175 Refrigerated Air DryerR134A refrigerant offers high overload capacities.Easy to use and maintain.Operation in high ambient of 115°F.Lowest dew point provided by thermal storage acts as a buffer covering sudden load variations.Stainless steel demister removes condensed moisture at all air flows.Environmentally safe – no risk of cross contamination between refrigerant and compressed air

MTB BDV-1200 SHREDDER --Specifications Per Manufacture's Information --ROTOR Length: 1200 mm (47.2 INCH) Diameter: 416 mm (16.4 INCH) -- 150hp 460 volts -- The unique features of our BDR shredders allow for the most efficient size reduction of difficult material types at the lowest operating costs on the market -- Includes Stand and Hopper

Heavy Duty 5-Axis Machine ideal for high speed and precision routing/sizing/milling/triming & surfacing of wood & composite parts, as well as machining light alloys. -- Steel bar table with threaded holes in 23.6" x 11.8" (600 mm x 300 mm) centers for attaching fixtures and vacuum jigs; system comes with one removable center safety wall for penular load and unload work. -- Axis strokes & quick positioning speeds: X-Axis is 120" (3,050 mm) at 275 FPM (84 MPM); Y-axis is 62.2" (1,580 mm) at 275 FPM (84 MPM); Z-axis is 35.4" (900 mm) at 131 FPM (40 MPM). -- A-Axis is +/- 120° at 30 RPM.; C-axis is +/-360° at 30 RPM. -- Equipped with: (1) 7.5 kW (10 HP), ISO 30 Type air cooled ATC spindle, variable speed from 1,000 - 24,000 RPM with 8-position tool rack. -- "OSAI 10/510" Series CNC Control operating with WINDOWS/XP "Pro Multilingual", 15" LCD color display, large hard disk for program storage, network ready via Ethernet. -- Features: 5-Axis simultaneous motion, M & G code programming operation. -- Complete with: Safety enclosure and automatic doors. -- Options: A- & C-Axis alignment system for re-setting both polar axes, please add ...$ 3,600; Radio touch probe system add ...$ 9,580; OSAI Teach Pendant System add ...$ 3,775.

MULTIAX T 1105 3626 Heavy Duty 5-Axis MachineIdeal for high speed and precision routing/sizing/milling/triming of wood & component parts, as well as machining light alloys.Specifications: -- The work table is 3,040 mm (119") x 1540 (60.6"), divided in two independent suction areas. During the work cycle the operator unloads and loads parts on one side of the machine table, while parts are being machined on the other side of the machine table. A safety wall is provided for separating the two work zones. The machine bridge will not enter the loading station until the operator is clear of the area. -- Axis strokes & quick positioning speeds: X-axis is 120" (3,050 mm) at 275 FPM (84 MPM), Y-axis is 62.2" (1,580 mm) at 275 FMP (84 MPM); Z-axis is 40" (900 mm) at 131 FPM (40 MPM). -- A-axis is +/- 120° at 30 RPM.; C-axis is +/-365° at 30 RPM.Equipped with: -- (1) 10 kW (13 HP) , HSK-63F type liquid cooled ATC spindle, variable speed from 1,000 - 22,000 RPM with 8-position tool rack. -- NEW OSAI Series open CNC control CNC Control operating with 20 Gb memory P, (5) simultaneously interpolated axes.CNC display unit with Windows XP Pro, 15" TFT color display, large hard disk for program storage, network-ready via Ethernet, features 5-axis simultaneous motion, M & G code programming operation. -- Complete with: 6.5 HP "TYP 251 Garder Denver" 255 CMH vacuum system and safety doors. Twin 10 place vacuum manifolds connected to automatic vacuum valves controlled by the CNC, enables clamping the workpieces on one table, while the other table is inactive, for unloading and loading operations.The vacuum system includes a filter to prevent impurities inside the pump.Professional set-up and delivery are an option .

MULTICAM 3000 SERIES 3-103-R 4 X 8 with ATC:50" x 100" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 16.9 HP vacuum system . -- Equipped with:(1) 13.4 HP HSD Routing HSK spindle, variable speed by inverter up to 23,000 RPM with 6-position rear mount tool changer.. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 6" Z-axis travel via lead screw drive; 1,400 IPM max. cutting feed, 2,500 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM CNC controller is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Complete with:16.9 HP vacuum pump, assorted tool holders, PC and manuals.

MULTICAM APEX 1R with 5' X 10' Table and ATC:60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 20 HP vacuum blower system.Equipped with: (1) 10 HP "HSD" ATC spindle, variable speed by inverter up to 24,000 RPM. 5-position, stationary tool rack X- & Y-axes are rack & pinion, Z-axis is lead screw, all axes are driven by brushless servo motors. Phenolic vacuum table with manual zone selectionControl: The MULTICAM CNC controller Is a stand-alone RISC/DSP system. Includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication.Includes: (20 HP) Vacuum blower for hold-down.

MULTICAM 3000 SERIES 3-204-R, 5' X 10' TABLE WITH ATC SPINDLE AND BORING BLOCK60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with ATC, boring and multi-zone vacuum table.Equipped with: 10 HP "HSK" automatic tool change spindle, variable speed by inverter up to 24,000 RPM. 8 position tool rack 4 spindle drill block in long axis direction Full table coverage on X- & Y-axis Rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system 8" Z-axis travel via lead screw drive. 1,000 IPM Max. cutting feed, 1,700 IPM max. rapid traverse rate on X- & Y-axis.Control: MULTICAM CNC controller Is a stand-alone RISC/DSP system. Controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes. RS-232 interface for PC communication. Includes: Assorted collets and tool-holders.

MULTISCORE CD-4-30 CABINET GROOVER: -- Specifications:30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor; 3-15/16" dia. arbor @ 3,500 RPM; aluminum bedplate slotted at 1-1/2" spacing for about (20) tool positions; quick release tensioner on the arbor drive belts. -- Equipped with: Feed System: Reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part through the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold-down arms with lateral & vertical adjustment mount to a T-slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter; variable feed motor via gear motor, with dynamic brake; 0 - 60 FPM. Features: -- Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam nut tooling locking system. -- NOTE: This machine is currently setup for wainscoting and kitchen cabinet doors.

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

MURPHY-RODGERS - HEC-216-S/10: 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust CollectorEquipped with: -- (216) 5" Dia. x 10' L Cloth filter bags for a total of: 2,827 sq/ff. of filter area. -- (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. -- (3) Front & (2) side 27" W x 54" H Filter access doors. -- (2) Square cone bottom hoppers each with: 25" x 25" Discharge openings. -- System utilizes: (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). -- CHICAGO 100 HP - 1,780 RPM Roof Mounted Blower with: 41"; Dia. inlet. -- Motorized dampers for winter & summer modes. -- Winter mode: Directs air back into building, reducing heat loss. -- Summer mode: Directs air outside, cooling building. -- Electrical controls (as pictured). VFD needs to be repaired or replaced.Complete with: -- Spare Filter Bags.NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts.

MURPHY-RODGERS - MRSE-14-RAL: Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with: 520 Sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.