2019 Tigercat 234b -9k frame hours -150 hours on motor and Hydraulic pump with warranty from Tigercat dealer -Packed both boom cylinders -Tight and dry Grapple -Straight fenders 80% tires Needs absolutely nothing !!!!!! Comes with 2018 CSI 18' Ground Saw!!!! or machine alone is 150k!!

2021 Tigercat 890 Shovel -5600 hours -72” Tmar grapples with about 2000 hours on them -28inch double grouser -Sprockets and rollers are @ 75% -Rails and pads brand new -Serviced regularly every 250 hours -Greased daily

2015 Tigercat H855C - 20,242 Carrier Hours - 1,600hrs on engine (Warranty till August 2025) - 1,600hrs on Pumps - Original Chains and Pads, Approximately 75% - New Sprockets - Plumbed for Logmax Head - Single Operator Single Shifted

9500 hours EHS transmission 45/78x32 front tires at 80% Dueling Rings 28x26 Rear Tires With 23.1x26 Duals At 80% Joystick Steering Rotating Seat Clock Heater Fuel Fired Pre-Heater Led Light Package Clean One Owner Machine Blade- Yes Chains- Yes Machine Is Ready for The Woods.

2018 TigerCat 604E -3xxx hours -Winch like new -EHS -Chains -Center is tight

2013 Tigercat 620D Cummins Dual arch Winch AC/Heat Turn around seat with joysticks New pins and bushings New glass New radiator 30.5 tires (one new and the rest at 80%) 13500 hours On the job working daily

2019 Tigercat 855e -4600 hours -New Boom cylinder -New saw pump -New valve under main boom cylinders -Complete service Spent over 75K in repairs MORE PICTURES COMING SOON!!!!

Engine: Tigercat FPT C87 New Final Drives Woods Ready Felling Head Yes Felling Head Manufacturer- Tigercat Felling Head Model- ST5702 A/C- Yes Heater- Yes

2016 Tigercat 635E -14,950 hours -No Blow by -Tight and dry -Chains with tracks

Dual Arch, Winch Turn Around Seat 30.5 Tires Joystick controls A/C Heat Woods Ready Category Specific Grapple- Yes Arch Type- Dual Winch- Yes Exterior ROPS- Enclosed

2023 Tigercat 625H Rare Boggie 2600 Hours Dual Arch With Tracks

2022 Tigercat 5702 Head -1100 hours -Blade in good shape -Tight and dry unit

2019 TIGERCAT H822D Harvester – Processor 9,761Hours H822D -Model Serial Number- 82233488 New Motor 28" single grouser pads Tigercat 575 head, 3/4" bar Clean straight unit! Delivery is available at the buyer’s expense

2014 TIGERCAT 250D Trailer Log Loader Hours- 9,604 Delimber And Bucksaw Included Runs And Operates as It Should Trailer Year- 2014 Trailer Manufacturer- Kodiak Delimber- Yes Woods Ready

Tigercat 230 Log Loader 5.9 Cummins Non delimber Tigercat grapple Hyd hookup for delimber or bucksaw Tight machine Runs and operates great

2019 Tigercat 1055C -7,000 hours -Blade -2 set of Eco tracks -Tight and dry unit Needs nothing !!!

1994 Timbco 425B 2005 Log Max processor head 22" capacity John Deere 6068 motor with 600 hours on it UC is good 9786 hours Runs and operates good

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

2021 Timber Buddy Mill Operation Comparable to a Wood-Mizer LT70 Kauffman's laser edger 2 strand log deck like new Roller transfer deck like new