RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each

RENZO BORGONOVO - SP 6P, ...6-Gun Spray Machine with 3/4" - 12" width cap.3-1/4" Max, part thickness and 32" min. part length. Standard specifications: -- (6) Gun mounts made from aluminum rods and HDPE mounting brackets, for connections for (6) HVLP automatic spray guns, and (1) dual diaphragm fluid pump. (Guns and Pumps are not included). -- Complete with: Teflon coated recovery cabinet for each spray station and easy rollout feature, front access door with large viewing window & gas shock support arms. -- (2) Paint circuits with (3) spray guns each (guns not included).Features: -- Machine is operated with a central control panel and gun timing is controlled by a PLC that times the spray guns in relation to the length of the work piece and feed speed. -- PLC Records the number of workpieces and total linear feet processed in session. -- The machine is set up with infeed & outfeed conveyors that operate at any speed between 60 and 300 FPM and is made up of Antistatic and Antisolvent belts and intermediate steel rollers between Spray Stations. -- 11.8" Dia., 1.5 HP exhaust fan rated at 4,000 cbm/Hr. -- This Sprayer integrates easily into any line whether as a primary unit or as an intermediate step. -- Overall length is just under 10'.Sprayer will include:qty (1) WAGNER HVLP Zip52 pump $1920.00qty (6) WAGNER HVLP aSP 30 spray guns with 1.2 nozzle $5,616.00Working dimensions: -- Length: Min. 800 mm / max. infinite. -- Width: Min. 15 / 300 mm. -- Height: Min. 15 mm / max. 100 mm. -- Height of worktable: 900 mm. -- Compressed air consumption - NI/min 1,500 – 2,000. Overall size: 3,000 x 2,900 x 2,220 mm and 800 kG (I,750 Lbs).

RENZO BORGONOVO MVS-2500 Automatic Sanding and Buffing MachineFOR LINEAR FRAMES AND PROFILES - Sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). -- Advancing speed electronically variable by inverter: 10 TO 50 M/MIN. -- Total power: kW 10,5 (14 HP) -- Compressed air: Atm 6 -- Total exhaust capacity; m3/h. 2800 (25 m/sec.) -- Working height: mm. 10 min. mm. 100 max. -- Working width: mm. 20 min. mm. 200 max. -- Working length: mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE"; (N° 4) -- Power motor: 3 HP (2.2 kW) -- Rotation speed: 1400 RPM -- Disc sanding unit holder shaft diameter: mm. 30 -- Spindle-disc sanding unit connection flange diameter: mm. 76 -- Disc sanding unit diameter: mm. 200 max. -- Disc sanding unit height: mm. 100 max. -- Dust suction hood diameter: mm. 100 -- Extraction rate: m3/h. 700 (25 m/sec.)

RENZO BORGONOVO - SP 6P, ...6-Gun Spray Machine with 3/4" - 12" width cap.3-1/4" Max, part thickness and 32" min. part length. Standard specifications: -- (6) Gun mounts made from aluminum rods and HDPE mounting brackets, for connections for (6) HVLP automatic spray guns, and (1) dual diaphragm fluid pump. (Guns and Pumps are not included). -- Complete with: Teflon coated recovery cabinet for each spray station and easy rollout feature, front access door with large viewing window & gas shock support arms. -- (2) Paint circuits with (3) spray guns each (guns not included).Features: -- Machine is operated with a central control panel and gun timing is controlled by a PLC that times the spray guns in relation to the length of the work piece and feed speed. -- PLC Records the number of workpieces and total linear feet processed in session. -- The machine is set up with infeed & outfeed conveyors that operate at any speed between 60 and 300 FPM and is made up of Antistatic and Antisolvent belts and intermediate steel rollers between Spray Stations. -- 11.8" Dia., 1.5 HP exhaust fan rated at 4,000 cbm/Hr. -- This Sprayer integrates easily into any line whether as a primary unit or as an intermediate step. -- Overall length is just under 10'.The Machine is priced with no guns or supply installed, these will need to be added by the buyer or a separate quote can be requested for guns and supply pumps.Working dimensions: -- Length: Min. 800 mm / max. infinite. -- Width: Min. 15 / 300 mm. -- Height: Min. 15 mm / max. 100 mm. -- Height of worktable: 900 mm. -- Compressed air consumption - NI/min 1,500 – 2,000. Optional: &#9679 InHand Networks Industrial Router &#9679 Overall machine dimensions and weight &#9679 Teleservice module for remote troubleshootingPrice includes the following options: &#9679 Stainless Steel carriage &#9679 Teleservice module for remote service.PRICE IS FOB EAST COAST PORT, INLAND FREIGHT WILL BE QUOTED.Overall size: 3,000 x 2,900 x 2,220 mm and 800 kG (I,750 Lbs).

RILESA UNI-X 2200 FEED THUR CNC BORING MACHINE W/4-SIDE DRILLING, in one pass. -- Specifications:Working Capacity; 230 mm - 2,200 mm (9' - 86.6") Length, 20 mm - 250 mm ((0.78" - 9.84" width, 10 mm - 60 mm (0.39" - 2.36") thickness.Capacity: up to 900 parts/hour without cross drilling. -- Features:One-man operated. 4-side drilling, in one pass. With Rilesa UNI-X drilling machine you get precision, quality and extreme high capacity. It is well suited to both small and large dimensions. It has short set up time and minimal maintenance. -- Polyurethane an guides ensure gentle handling of components. The restraining clamp automatically adjust to component width ensuring correct location to the zero point. -- The drilling boxes are designed for high speed drilling, 4500 RPM. The tool inserts can be chosen Between direct or snap assembly. Special drill boxes can be manufactured to specific customer requirements. -- Assembly of drill boxes takes place with a snap function and is simply locked with screw. The drill box can be freely turned between 0 and 90°. In the outer positions there are stops. -- The drill groups unique design gives a high degree of adjustment flexibility. The center distance between groups is 95 mm. Pneumatic over hydraulic drill feed. Drill speed, 4000 RPM. -- The components are fed in pneumatically up to the reference stop and locked securely in this position. A unique safe regulated system makes sure the component is in place without pressmark. -- The operator uses signal lamps to make adjustments. The operator manually moves the drill groups into position checking the lights. Yellow to green = Tolerance. -- The machine closed design with built in dust extraction gives the perfect place to work. Notice the sturdy construction of the machine body. -- Loading of components is very easy by pushing the stack in through the brushes. The machine components are transported gently back to the operator. The conveyer can run continuously or in step mode. -- For long components support elements can easily be added. They are located with a simple clamp and ensure straightening of the workpiece. -- The machine can be delivered with sideways displacement of the drilling group. The drilling group displace up to 100 mm, this function combined with programming of the drilling, do difficult drilling in one passage, possible. -- The control system is integrated in the back of the machine, well protected against dust. There is room for future expansions to be added. -- Hopper / Magazine:Pneumatic magazine with ergonomics and user friendly access. Automatic fixation to the zero point by a pneumatic counter clamp with polyurethane and nylon covering for careful handling of the component. -- Return conveyor with an adjustable catcher tray, build-in clamp cylinder mounted at each end, for flexible and safe clamping of the components, adjustable catcher tray. -- Operator Interface:Advanced 15"; color TFT touch screen control system where

RITTER R-1207P2 Door and Panel ClampSpecifications: -- Table working area: 146"; x 61"; approx. -- Steep pegboard style table. -- Motorized travers top beam of pneumatic down-acting clamps. -- (24) Pneumatic down-acting clamp cylinders. -- 6"; x 6"; clamps pads. -- (2) Position adjustable side pressure clamps. -- 5"; diameter nylon pads. -- 6"; x 6"; nylon pads. -- Clamp is setup in two equal zones. -- Pedestal mounted controls (One left and one for the right zone). -- Side pressure cylinders have approx. 5"; of stroke. -- Top down pressure cylinders have approx.. 4"; of stroke

RITTER R-200 E/A Face Frame Assembly Easel Dimensions 5' x 12' with 45° Bed angle;Specifications: -- Hold-down beam with (5) adjustable hold down cylinders. -- Squaring bars on left, right and bottom sides. -- 1" Thick laminated surfaced table. -- Heavy duty steel frame. -- (1) Coil-hose for pneumatic screw gun (screw gun not included). -- Air pressure required 100 PSI. -- Footprint: 165"l x 48" D.Shipping dimensions: 68" x 169" x 30" H. Shipping weight 1,250 Lbs.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SCM TECH Z1 CNC MACHINING CENTER (W/ATC/BORING/"C" AXIS): -- Specifications:Working Capacity:"X" axis 120" (3,050 mm), "Y" axis 41.3" (1,050 mm), "Z" axis stroke 5.9" (150 mm), max material thickness 3.9" (100 mm). -- Positioning speed: "X" & "Y" axis is 229 FPM (70 MPM), "Z" axis is 72 FPM (22 MPM).Axes positioning by AC Brushless motors and YASKAWA drives; all axes ride on prismatic guideways & sliding blocks. -- Worktable:(6) "TV" tube-less mobile support rails, (2) vacuum pods per rail; (4) pneumatic lifter rails for heavy panels; (6) pneumatic pop-up backstops, (6) pneumatic pop-up front stops; (2) pneumatic pop-up side stops.LED display positioning assistance for the support rails & vacuum pods; (2) independent working fields; -- Boring Head:3 HP (2.2 kW) motor, 4,000 RPM; (8) Independent vertical spindles, (5) spindles in "X" & (3) spindles in "Y".(6) Horizontal spindles (2+2) in "X" & (1+1 ) in "Y" axis; (1) "X" axis grooving saw for max. 120 mm dia blade - 6,000 RPM. -- Machining:(1) 10 HP (7.5 kW) Air-cooled Electro-spindle router with HSK F63 adaptor; variable speed from 1,000 - 24,000 RPM, max. torque achieved at 12,000 RPM; static inverter for stepless speed & rapid shutdown rotation.(1) NC controlled "C" Axis for 360° Horizontal Processing.(1) 10-Position ATC rack mounted on the RH side of the machine. Max. tool weight is 8 KG (17.6 Lbs). -- Operator & Machine Control:PC front end with SCM "Xilog Plus" + Windows "7" Pro operating system; 15" CRT color display, CELERON 2 GHz processor, enclosed in air-conditioned cabinet."XILOG PLUS" offers the advantage of having simple and intuitive software • Easy-to-use: easy planning of 3D elements due to the software modules: Cabinet to create complete cabinets and furniture; Nesting for rectangular and free-form elements it also ensures reduced production time and tool paths; WD to create complete fastenings; intuitive programming due the pre-set large graphics macro library; Immediate work table set-up from 3D graphics -- Complete with:(1) 100 M³/Hr Vacuum Pump; automatic lubrication system; "BUMP STOP" safety system; Scrap conveyor. -- Actual Model is SCM TECH Z1

SCM SANDYA 10/S M2 2-Head Wide Belt SanderHead Configuration1st Head: 7" Diameter Spirally-grooved steel contact roll, 20 HP Motor.2nd Head: Combination head, 7" Diameter Spirally-grooved rubber-coated contact roll, Finishing platen with Electronic sectional pad with EPICS System, 3-1/2" Steel contact roll, 13 kW (17-1/2 HP) Motor.Specifications: -- 4.5 - 9 m/min (15 - 30 FPM) Variable feed speeds, -- Part thickness 4 mm (0.2") to 170 mm (6.7"). -- 43" W x 103" L Abrasive belt, Electronic sanding belt tracking & Pneumatic belt tensioning. -- 34" H Natural rubber feed belt,Equipped with & Features -- Automatic thickness adjustment, Automatic feed belt tracking & Tensioning, -- Motorized rise & fall of working table, -- Part thickness & Conveyor belt speed LED readout, -- Infeed safety bar for operator protection and oversized parts. -- 3" Diameter Entry & exit rolls, 13" L 2-Roll Infeed & Outfeed extensions with 2" Diameter Rollers & Manifold. -- Unopened box of (10) KP520 100 Grit Belts (Purchased for $500).Dimensions: 88" L x 86" W x 90" H.Weight: 4,440 Lbs.

SCM SANDYA 7 RCS Wide Belt Sander2-Head, 42" cap. - Great solid wood finish Sander. -- 1st Head: Grooved steel contact roll, 6-1/4" dia., 30 HP motor -- 2nd Head: Combination head, rubber covered contact roll, 6-1/4" dia. (65 Shore), and 2" wide finishing platen, 25 HP motor. -- 43" x 75" or 85" Abrasive belts with electronic tracking & pneumatic belt tensioning, pneumatic exclusion of all contact rolls. -- Conveyor belt feed with variable feed speed, 14.5 - 30 FPM, 1.5 HP motor, automatic part thickness adjustment, -- Motorized thickness opening with LED readout,0" - 6-1/4" via (4) precision conveyor bed jacks. -- Infeed & outfeed spring loaded rubber covered holddown rolls on all heads, -- Motor load meters, infeed and outfeed conveyor extensions, WYE-DELTA soft start.

SCMI SANDYA S300 RCS 110 DUAL HEAD WIDE BELT SANDER43" Width capacity, (1) contact roll & (1) combination head with contact roll & segmented platen.Head Configuration1st Head : 5-1/2" diameter steel calibrating contact roll2nd Head : 5-1/2" diameter rubber covered contact roll and adjustable segmented finishing platen.Specifications -- 0" to 6.69" thickness capacity via motorized bed adjustment with auto set up device. -- Abrasive Belt dimensions 43" X 75" -- Rubber coated pressing rollers before and after working unit -- 1 HP Inverter variable speed feed unit. -- Feed speeds 10 - 60 FPMEquipped with and Features -- Y-Delta two-stage reduced voltage starter on 18 HP main motor -- 2 Roller Infeed and Outfeed table extensions -- Automatic Electronic Table Positioning Device -- Adjustable sanding drum and pad position for micro precision adjustment -- Electronic digital thickness readout of work table position -- Powered table lifting by means of (4) heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability -- Electronic tracking of abrasive belt -- Automatic feed mat tracking -- Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt

SCM SUPERSET 23 XL Feed Through Moulder; 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4".Head sequence: Bottom 12 HP (new bearings installed), right/left 12 HP, top 17.4 HP and bottom 12 HP motor. Includes spindle brakes.Spindle: Dia. 1-13/16" with cutterhead speed at 6,000 RPM. SCMI RAPID "Set Up" setting system for left and top vertical heads to accommodate width and height tool measurements. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. Feed: Variable feed drive 4.8 HP with feed speed from 13 - 79 FPM. Tables: Infeed 2 M (6'6") with manual table lubrication pump. Central lubrication. Side pressure roller mounted to infeed table. Lighted safety enclosure.NOTE: Above description is based on Model Type and is considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot

SCM - ACTION FL 2500: Case Clamp (Automatic) -- SpecificationsMax. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: 15 KN (3,372 Lbs).Features: -- Full top & bottom platen for maximizing pressing PSI on the box. -- Rack & Pinion guides at all (4) corners of the top platen & side pressure to keep the top platen parallel and the side pressure square. -- Sizes of box can be input for efficient cycle control when running repetitive box closings. -- Machine can also find the size of the box, so all the Operator has to do is open the Clamp to a size larger than the box to be clamped. -- The vertical & horizontal pressure is adjustable according to the type of furniture to be assembled. -- Machine is equipped with: (3) Side pressure bars & able to sequence different furniture pieces without manual intervention. -- Pressure supplied by infinitely adjustable brushless electro-motors.Complete with: -- 5.7" Touchscreen panel with: Software by CPC in order to program cycles. -- Rack & Pinion system, Brushless motors. -- Front & rear photocell barriers. -- Actual Model is: SCM CPC ACTION FL 2500

SCMI MINI MAX Formula S 2 Sliding Table SawSpecifications & Features: -- 128" Cutting cap. w/ Standard scoring saw and carriage, 5 HP motor, stop on fence for cuts extendable to 128"; 50" Cutting width w/ rip fence.Equipped with: -- 14" main blade, 4-1/2" scoring blade, 4-1/2" max. blade cutting height at 90°, 3-1/2" max. blade cutting height at 45°. -- 4,000 RPM Main blade speed, 8,500 RPM scoring blade; 90° - 45° blade tilting.

SCMI MINI-MAX ME 25 EDGEBANDEDR, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.Workstations: -- "ME 25" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters. -- Top & bottom scraping station. -- Top & bottom buffing, 3,000 RPM motors.22 FPM Fixed feed speed with 0.8 HP drive.Complete with: Sound enclosure, outrigger panel support, frequency converter, and used tooling on the stations.Features: -- Control Panel on machine infeed side -- Machine frame made of high rigidity ribbed steel to guarantee excellent support -- Top thick steel pressure beam with rubber coated wheel -- Manual adjustment of top beam with Auto positioning of operating units -- Numeric indicator of selected panel thickness -- Glue smoke-specific exhaust outlet; centralized extraction of the dust -- Panel support roller which can be extended the entire length of the machineNOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCMI S 630 Single-Head PlanerSpecifications & features: 24" Width cap.; 12 HP main motor, 2 HP feed motor; 4-3/4" dia. helical spiral cutter head 4-sided inserted tooling rotates @ 4,500 RPM; 1/8" - 11-3/4" thickness opening via motorized bed with LED readout for fine adjustment. -- Features: Max. depth of cut 5/16"; 10" min. length of workpiece; variable infeed speed from 20 - 56 FPM. -- Equipped with: 20-3/4" x 39" Cast iron table, sectional chip breaker, sectional grooved infeed & solid outfeed rollers, adjustable bed rollers. -- Complete with: Magnetic starter and dust hood w/6" dia. port.NOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCM SI 400 NOVA 10' Sliding Table SawSpecifications: -- Max. cutting length 3,200 mm (125.98";), Max. depth of cut 147 mm (5.79";) at 90° & 97 mm (3.82") at 45°. -- Main saw: 8 kW (10-3/4 HP) Motor, Blade dia. 300 - 400 mm (11.81" - 15.75";), Tilting arbor dia. 30 mm (1.18") with 0° - 45° Tilt, & Blade speed 3,700 RPM. -- Scoring saw: 1 kW (1.34 HP) Motor, Blade dia. 120 mm (4.72";), Arbor dia. 20 mm (0.79"), & Blade speed 8,500 RPM.Equipped with: -- 360 x 3,200 mm (14.17"; x 126"; x 35-1/4"; H) Aluminum sliding table, 20-1/4"; x 35-1/4"; Cast-iron fixed table, 35-1/4"; x 35-1/4"; Extension table, 47-1/4"; L x 3-1/2"; H Aluminum rip fence, with Rip cap. 1,270 mm (50"). -- 8' Custom-built cross-cut table, with Aluminum cross-cut fence. -- External manual adjustment of scoring unit. -- Sliding swinging support arm and Parallel overhead blade guard.Complete with: -- 21-1/2"; x 27-1/2"; H Auxiliary Table and Scoring blade.Actual Model SI 400EP NOVANOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCMI T110 ShaperSpecifications: -- 6.6 HP Motor, 1-1/4" interchangeable spindle tilts -5° to +45°. -- (5) Spindle speeds: 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. -- 39" x 29-1/2" Table; 13.4" max. insert opening, digital readout for spindle height setting, 6-1/8" working height under nut; adjustable fence guard assembly. -- Complete with: Mechanical spindle brake, hand spindle lock, reverse rotation switch, (5) table insert rings, and (2) 3" dust outletsNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCM T 130-NPS Heavy-Duty Shaper -- 1-1/4" Dia. interchangeable "MK 5" Spindle -- 9 HP belt drive motor with (5) spindle speeds of 3,000 - 4,500 - 6,000 -7,000 & 10,000 RPM, 6" max. cap. under nut; (5) table insert rings, 13-1/2" max. insert opening, 47" x 28-1/2" Cast Iron table w/slot for miter gaugeNOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCMI T-130 Heavy-Duty Shaper Specifications: -- 1-1/4" Dia. spindle and 9 HP belt drive motor, (5) Spindle speeds of 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. -- 6" Max. cap. under nut. -- 47" x 28-1/2" Cast Iron table w/slot for miter gauge and with13-1/2" max. insert opening. -- Adjustable 46" x 5" back fence assembly. -- Complete with: Reverse rotation switch, dust hood, mechanical spindle brake, spindle locking foot pedal -- Includes: STEFF 4-Roll Power Feeder.