Pallet Equipment For Sale

Froedge 450 Super Deduster

2023 | Lil' G2 Nailer | 48x48 | Comes with 10 HP Air Compressor

Gap 960 3 Stringer Pallet Nailing Machine S/N 99929

Approx. 1999 GAP 960 3 Stringer Nailer with Stacker

GBN 48" Block & Mat Assembly with Hydraulic Power Unit.

GBN 48" Parts Machine with Hydraulic Power Unit.

GBN Excalibur Pallet Nailing Machine

2005 | Stringer Feeder | 480v | Board Hoppers | Great Running Condition

GBN Explorer Pallet Nailer

GBN 48" Block & Mat Assebly with Hydraulic Power Unit

480v | Setup for Stringers | Can be converted to Block Pallets

The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.

Used NXL Notcher -230V 3PH -Dust Chutes -Standard Teeth NXL Pneumatic Notcher - 12” Diameter X 9” Wide Index-able Notching Heads - 0" - 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height, Up to 60” Material Width (longer available) - Production: Up to 800 Stringers Per Hour - Top Hold Down Clamp - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 60” L, 90” W, 50” H - Weight: 2000 lbs

2021 | 480V | Produces up to 800 Stringers Per Hour

NXL-M Single Head Notcher. 20HP motor, can notch 4 stringers at a time. Notches new or recycled material. Equipped with a pop-up guard. Table floats on linear bearings and takes minimal effort for the operator to move.

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.

April 2024 - Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Operator Return Table - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 84” L, 90” W, 48” H - Approx. Weight: 1400 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs - (2) 10 HP Motors (220/1/60 TEFC) 2 HEAD Resaw Control Panel - 220V Line Voltage (Single Phase) - 16" Tall X 16" Wide Enclosure (UL Type 1,3R,4,12) - 120V Control Voltage - Service disconnect in panel door - (2) 10HP 220V Motor starters, breaker w/OL - (2) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2) - (1) Emergency Stop Button w/ legend plate- Completely for 220V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit Overload Protection 5' Roller Case Section with Adjustable Legs - 16ga Rollers - 2 Leg Sets with Braces - Height Adjustable from 26" to 32" - Galvanized Finish (Not Painted)

RESAW-RM6X6 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -1" Blade - 10 HP Motor (220/1/60 TEFC) - Completely Prewired for 220V Single Phase - Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Mounted at Operators Station - 39 FLA -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs

The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!