Case Farmall 75A Tractorw/ 74 engine hp, 3 pt hitch with dual hydraulics, new tires, 30 engine hours, 60 HP PTO, No DPF No Regen, 4,299 hitch lifting capacity, clean includes little fella seat with seat belt, all with an all weather cab. L610 Front End Loader is brand new. Location: 6901 US 167, Ville Platte, LA 70585

Newman Whitney KNO 24 trimmer, S/N 24120897, will pass a 5 1/2" cant, (9) station w/ individual motors, built-in wood waste block conveyor, used on dry line, good condition (ref# 200). This machine has just been removed It is setting inside and ready to load on your truck.

Bank is ready to negotiate 2020 Yanmar wheel loader tier 4-V8 compact wheel loader w/ quick couple, 4' pallet forks, 15.5/70R18 tires (no wear), S/N YCG00V80J005000427, Selling at auction January 15, 2025 Proxibid. GWKittrell Auctioneers excellent condition, 518 hours, tier 4 engine, hydrostatic drive transmission, variable speed forward & reverse, Seller #204, Contact Jackie Kittrell 931-797-6284

In Stock. Brand new AKKUSLAR Model CBK 600 multi cut & double end trimmer w/ controls mounted on machine. 5 Saw with 4 easy slide and lock movable saws 7.5 HP each motor. Electric Feed Through sharp chains.. Price and performance will amaze you with this 50 year manufactureer of sawmill machinery. Simple handling and operation easy access for maintenance This machine includes a set of 5 saws at no additional charge also a 45’ X 16" wide X 7" Deep 14" - 16" as it is a split level overall belt conveyor to adapt to the trimmer as you please (throwing it in for $1,500 Call Kittrell Sawmill Brokers for more information (931) 797-6284

HYM 350 Hydraulic Horizontal Slab Reclaim Saw with operator controls (2) 40 HP motors cuts boards as short as 48" X 4-3/4 to 13-3/4 wide X 1/2 to 4-3/4 thick. This might slab saw will produce boards from slabs that would normally go to the chipper. Reclaim and pay for this mighty saw

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.

This machine is designed for cutting a max height of 4"X 27-1/2 holds up to 6 saws and can be used for a Multi Gang Rip as well.

This edger is designed to cut cants and boards with max of 4-1/2 in height There are 4 saws with 3 shifting saws. Hydraulic feed with knurled feed rolls. Indeed top press roll is hydraulic comes with motor & PLC controls and joy stick controllers Call Rachel 931-698-3342

Brand new Double Arbor Gang Saw. In stock price will not be available after this machine sells. This one is 8". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. This is a limited offer as this machine comes with one complete set of saws. comes with a set of spare ware parts. Parts are stocked in the US by Kittrell Sawmill Brokers FOB Columbia, TN Will load on your truck. Call Jackie 931-698-3342. Retail price $225,000 save $26,150 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284 Try before you Buy

This unique combination board edger/ multi-gang rip saw has capabilities of edging, splitting boards and even panels. saws can be configured to almost unlimited possibilities. Heavy duty construction https://akkuslarmachine.com/products/. This one is in stock and ready to load. It also includes a set of saw blades. 931-797-6284. or Call Amy 928-723-9449 with super grip chrome feed rolls. Quality and performance with every cut Simple Handling and Operation Easy access for routine checks and maintenance Just Call or text Kittrell Sawmill Brokers 931-797-6284 comes complete with controls and operator controls. Try before you buy

Turn out Timbers, cross and switch ties daily. Soft or hardwood This quad scragg will cut 6” to 13.7" logs 5’ to 20’ , log Turner infeed 4 independent arbor saws. Hydraulic Sharp Chain Feed Through..... outfeed with can't/rail tie feed through and board separation tailing device. Quality , performance in every cut Simple handling, operation and maintenance. This machine is in stock and has a complete set of new saws Special comes with log loading conveyors and lumber drop out conveyor Up to 200 HP total saw power depending upon application includes MCC and PLC. Deluxe operator console with chair. Purchase now machine is in stock Great for making cants and crossties as well as lumber with the 220 Gang (in Stock) or the 160 bull edger behind it. infeed and drop out transfer decks just add $95,000 for all 3 conveyors super deal save $83,000 today total with conveyors see new price 0% down and no processing fee on leasing Call Jackie 931-698-3342. Try before you buy!

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

this mighty slab saw is compact and can cut singles and doubles. Saws adjust with the touch of a control. Horizontal set up and each independent arbor holds 2 saws and has its own motor for faster recovery for doubles. Air press roll on infeed with fence Hydraulic side feed roll includes motor controls and PLC controls. 60 HP motor Ready to hook to your 440 Volt power Just need a single slab saw? Look at the Akkuslar HYM 350 Call 931-797-6284

This beefy mighty machine is perfect for cross ties and custom timbers, and pallet and lumber cants. Single cut or double cut side boards. Excellent log turner with sharp chain feed through for lengths up to 60' special order. Operators controls Nice tailing device with center press roll section for timbers/ cants and ties. Quality and performance with every cut. Simple operation and maintenance. Call Kittrell Sawmill Brokers 931-698-3342

This bull type gang edger is truly the beast. Arbor runs up to 8 saws with a combination arrangement that fits your needs. 4 3/4 inch X 25.5 inch input with the output of 1/2" to 4-3/4" with 6-1/4 thick capability. Cutting process is provided with diamond circular saws, single saw shaft is fixed. Hydraulic roller with fence. Infeed top press roll is hydraulic. Cut grade, pallet stock or pallet cants with this mighty machine comes with a set of spare parts. Call 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

Log head saw cutting system. It is designed to cut logs using your favorite carriage with a diameter range of 6" to 27.3/4" cutting process is provided with maximum precision with two fixed strobe circular saw. That's back and forth on the track this is a double cut head rig. (2) 60 HP motors run 60' per minute. The saw pictured here was a trade in and will be retrofitted at the factory. Call 931-698-3342

4 saw edger with 3 movable saws and saw auto lube system with PLC joy stick controller. Adjustable for 4-3/4" material hydraulic cylinder saw position station Hydraulic feed through comes with motor and PLC control cabinet. Buy and Conveyors with jump up chains available as well. Special Deal Laser Lights and saws included.. Call 931-698-3342 Jackie Kittrell Try before you buy you don't like it send it back. But we are certain you will love it.

2015 Baker Dominator Band Sawmill, Model 3650E with Baker (3) Strand Infeed Deck. Excellent condition, hooked up to power and ready to be demonstrated. Low use.... Good Track Infeed deck has new cylinder Hydraulic over electric general factory networks. ref# 119 Call Jackie 931-698-3342. Make us an offer Seller is negotiable on this machine that is over $100,000 new