Brand new Double Arbor Gang Saw. In stock price will not be available after this machine sells. This one is 8". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. This is a limited offer as this machine comes with one complete set of saws. comes with a set of spare ware parts. Parts are stocked in the US by Kittrell Sawmill Brokers FOB Columbia, TN Will load on your truck. Call Jackie 931-698-3342. Retail price $225,000 save $26,150 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284 Try before you Buy

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

CAT Generator, Ref# 138 Call Amy for Details 928-723-9449

OWNER IS RETIRING! Sliding Gravity Roll Case for Straight Line Rip Saw, Special Design w/ air stop brakes, (2) steel overhead mounts and one laser light, Excellent for Precision Edging. Seller will load on your truck. (ref #74) Call Rachel for more information 931-797-6284

air exchange horizontal tank mount air compressor, (2) 15 HP dual compressor, Ref #204, Call 931-797-6284

Air compressor was used in food processing and is very clean, variable feed, 250 HP Seller will load on your truck, ref # 203, Call 931-797-6284 Motivated seller make a good offer

April 2024 - Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342

2004 Grizzly pop up chop saw 24", S/N 24010 Model G0549, 15 HP 3 phase 220V/440V, cuts 8" thick x 21" wide material carbide tip 24" saw w/ machine, flex dust removal piping, Ref #204, Call 931-797-6284

2021 Grizzly Extreme band saw, S/N 210-10180 Model G0513X2BF, 17" wheels W/ 2 HP motor w/ motor brake & foot pedal w/ tilting table 23 5/8 x 17 1/4 single phase 200V 131 1/2" band length Ref #204, Contact 931-797-6284

(1) approx. 24" 20 HP Hartzell high speed transfer fan, (1) 56" 150 HP collector fan (ref #173)

Hemco double end trimmer w/ even end rolls, feed through chains & outfeed chains (trimmer can sell with stack and sort line upon request),ref#170, Call Amy for more information 928-723-9449 OBO

Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, Call Amy for more information 928-723-9449 OBO

HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes electronic setworks, (no conveyors), excellent standalone machine, (ref #200)

Ingersoll Rand SSR II 50 HP screw type air compressor, believed to have 20,000 hours, Ingersoll Rand Model TS2A dryer 150 PSI Max refrigerant dryer (ref #174), 460V 3 phase, Approximate 220 CFM, Call Rachel for more information 931-797-6284

Kiln Direct natural gas heat treating kiln 11'8" x 23 1/2' x 12' tall (outside dimensions) 2022 "Junior End Load" 6-cord, computer controls w/ HMI screen, info taken from Kiln Direct and deemed accurate but not guaranteed, Ref #204, Contact 931-797-6284 Subject to bank confirmation. Make us an offer.

Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed this saw is out and ready to load in your truck. Ref #188

Newman Whitney KNO 24 trimmer, S/N 24120897, will pass a 5 1/2" cant, (9) station w/ individual motors, built-in wood waste block conveyor, used on dry line, good condition (ref# 200)

Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Ref# 119, Contact Amy (928) 723-9449

REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000

Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449